XROS 4 Kits

Default sorting
Show
16
  • Quick View
    (0)

    Uwell Caliburn X Vape Kit

    The Uwell Caliburn X pod kit is a sleek and stylish option that remains simple to use. Recommended for beginner and experienced vapers alike, it delivers an MTL (Mouth To Lung) vape and is powered by a built-in 850mAh battery. Plus, thanks to its adjustable 5-20W power range, you can set the kit to deliver a vape that suits you. Each kit comes complete with a 2ml, refillable Caliburn X pod as well as two Caliburn G mesh coils to get you started.

    Features:

    • Beginner-Friendly
    • Built-In 850mAh Battery
    • 5-20W Power Range
    • Single Button Operation
    • Inhale Activation
    • MTL Vaping
    • E-Liquid Window
    • Adjustable Airflow
    • 2ml Refillable Pods

    Featuring only one button, the Caliburn X is easy to get on with even if you’ve never vaped before. You can use this button to switch on your kit, select a power level and start vaping. When you’re done, lock the kit by pressing the button five times. When unlocked, you can also vape by just inhaling on the mouthpiece. This inhale activation plus the small amount of vapour the kit creates means the Caliburn X feels a lot closer to a cigarette. At the same time, the mesh coils also mean you’ll experience a better flavour.

    Easy to refill and capable of holding up to 2ml of your preferred e-liquid, the Caliburn X pods feature a top-filling design with snap-fit lids. This means you can top up your pod without actually removing it from the device. Speaking of e-liquid, a small window is also built into your device so you can see exactly how much is left. When it is time to refill, we recommend either a 50/50 e-liquid or higher PG option.

    contains

    • Uwell Caliburn X Device
    • Uwell Caliburn X Pod
    • 0.8 Ohm Uwell Caliburn G Coil (Pre-Installed)
    • 1.2 Ohm Uwell Caliburn G2 Coil
    • USB-C Charging Cable
    • User Manual
  • Quick View
    (0)

    Uwell Caliburn G5 Lite Koko Vape Kit

    The Caliburn G5 Lite Koko kit is ideal if you are looking for a refillable device that’s both simple to use and pocket-friendly. It features a built-in 1600mAh battery that should last you all day, and can be recharged in an hour. With a 35W maximum power output and compatibility with all Caliburn GPP and G3 pods, it’s suitable for both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. A 0.6 Ohm GPP pod is included in the box.

    Features:

    • 1600mAh Battery (Charges In Under An Hour)
    • Up To 35W Wattage Output
    • MTL & RDTL Vaping
    • Inhale Activation
    • Smart Mode
    • Adjustable Airflow
    • 2ml E-Liquid Capacity
    • Compatible With Caliburn GPP & G3 Pods
    • Top-Filling Pod
    • Compatible With 50% VG E-Liquid

    Setting up the Caliburn G5 Lite Koko is simple. Fill up the pod and push it into the device, and then inhale to start vaping. The device features Smart Mode, which will automatically adjust the power output to match the pod you’ve chosen. A stepless airflow slider on the side of the kit allows you to adjust how loose or restricted each inhale is.

    The kit is compatible with Caliburn GPP and G3 pods, which feature a leak-resistant top-filling design. Each pod houses a mesh coil with Uwell Pro-FOCS technology to improve flavour production by heating the e-liquid quickly and evenly. There are coil options from 0.4 Ohm to 1.2 Ohm. Lower resistance pods work best for RDTL vaping. Higher resistance pods are made for MTL vaping, and will produce a small amount of vapour. We recommend using 50% VG e-liquid with all Caliburn pods.

    What Pods Can I Use With The Caliburn G5 Lite Koko?

    The Caliburn G5 Lite Koko is compatible with the following pods:

    • Caliburn GPP Pods: 0.4 Ohm (35W), 0.6 Ohm (25W), 0.9 Ohm (15W), and 1.2 Ohm (13W)
    • Caliburn G3 Pods: 0.4 Ohm (5-25W), 0.6 Ohm (5-25W), 0.8 Ohm, and 1.0 Ohm (5-10W)

    Contains:

    • Caliburn G5 Lite Koko Device
    • 0.6 Ohm Caliburn GPP Pod
    • User Manual
  • Quick View
    (0)

    Voopoo Argus G3 Mini Vape Kit

    The Voopoo Argus G3 Mini vape kit is a compact, lightweight device that’s ideal for both beginner and experienced vapers who are after something easy to use. Its sleek aluminium body houses a large 1350mAh battery which should last you all day before needing to be recharged. Its 30W max output supports the full range of compatible Argus pods, so it can be used for both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping.

    Features:

    • 1350mAh Built-In Battery
    • 30W Max Output
    • MTL & RDTL Vaping
    • Inhale Activated
    • Smart Mode
    • 2ml Top-Filling Pod
    • Fixed Airflow
    • USB-C Charging

    Setup is simple thanks to the integrated smart chipset. Once your pod is inserted, your device will automatically detect the resistance, setting the ideal wattage for you. Start vaping by inhaling on the mouthpiece, and you’ll experience a smaller amount of vapour, similar to a cigarette. You’ll find a small LED in the centre of your device which change colour to keep you up-to-date on your battery level.

    The included 0.7 Ohm Argus V2 pod features a top-filling design, letting you top up without removing them from your device. Utilising iCosm Code 2.0 technology and a mesh coil build, this pod boasts a leak-resistant design and is made to last for longer before needing to be replaced. As the coil is built-in, you can replace the whole pod with a new one once it has burnt out, after around a week. For best results, pair this pod with a 50% VG e-liquid.

    What Pods Can I Use With The Voopoo Argus G3 Mini?

    The Voopoo Argus G3 Mini is compatible with the following pods:

    • Voopoo Argus pods: 0.7 Ohm (14-18W), 1.0 Ohm (18-30W)
    • Voopoo Argus Snap pods: 0.7 Ohm (14-18W), 1.0 Ohm (18-30W)

    Contains:

    • Voopoo Argus G3 Mini Device
    • 0.7 Ohm Argus V2 Pod
    • USB-C Charging Cable
    • Pod Compatibility Guide
    • User Manual
  • Quick View
    (0)

    Geekvape Wenax Q2 Vape Kit

    The Geekvape Wenax Q2 pod kit is a sleek, easy-to-use pod kit that’s ideal if you’re looking for a low maintenance option. It is powered by a fast-charging 1250mAh battery that will last most vapers all day, and it can be recharged in just under 40 minutes. Its 8-30W variable power output and compatibility with the full range of Geekvape Q replacement pods allows this kit to work for both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. Plus, you get a 0.6 Ohm and 0.8 Ohm pod included to get you started.

    Features:

    • 1250mAh Built-In Battery (Charges In Under 40 Minutes)
    • 8-30W Wattage Range
    • MTL & RDTL Vaping
    • Inhale Activated
    • Smart Mode
    • Variable Wattage Mode
    • Compatible With All Geekvape Q Replacement Pods
    • Adjustable Airflow
    • 2ml Top-Filling Pods
    • Built-In Mesh Coil

    With a straightforward single-button design, the Wenax Q2 keeps set up simple. Top up your pod and insert it into the top of the device, then inhale on the mouthpiece to vape. Its Smart Mode will automatically set the best wattage for your coil, or choose it yourself for added customisation. With an adjustable airflow slider, you can choose between a tighter or looser inhale with ease. Once your battery runs out you can quickly recharge with the included USB-C cable.

    Each Wenax Q2 kit includes two 2ml Q replacement pods that feature a simple top-filling design and built-in mesh coils for boosted flavour. There’s no maintenance required, once your coil runs out you can swap your whole pod for a new one. The 0.6 Ohm pod offers a looser RDTL inhale, while the 0.8 Ohm pod delivers a more discreet MTL vape. No matter which pod you go for, we recommend pairing it with a 50% VG e-liquid for best results.

    Contains:

    • Geekvape Wenax Q2 Device
    • 0.8 Ohm Geekvape Q Replacement Pod
    • 0.6 Ohm Geekvape Q Replacement Pod
    • USB-C Charging Cable
    • User Manual & Info Cards
  • Quick View
    (0)

    Vaporesso Xros 3 Mini Vape Kit

    The Vaporesso Xros 3 Mini vape kit is designed with simplicity in mind and is an ideal option for first time switchers. Its built-in 1000mAh battery is capable of supporting lengthy sessions of vaping. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which eliminates the need for messy coil changes thanks to featuring an integrated RDTL (Restricted Direct To Lung) coil.

    Features:

    • RDTL Vaping
    • Built-In 1000mAh Battery
    • Inhale Activated
    • 2ml Refillable Pods
    • Integrated Coils

    With inhale activation technology, there are no buttons or menus to contend with. All you have to do is puff on the mouthpiece, which will create a moderate amount of vapour for an RDTL vape that has a tighter feeling draw. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour.

    Xros pods feature a top-filling design and are easily refilled via the filling port located underneath the mouthpiece; you don’t even have to remove them from your device when refilling. The mesh build of the coils inside means the e-liquid heats up faster for better flavour. We recommend pairing this kit with 50% VG e-liquid or higher PG options.

    Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.

    What Pods Can I Use With The Vaporesso Xros 3 Mini?

    The Vaporesso Xros 3 Mini is compatible with the following pods:

    • Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)

    Contains:

    • Vaporesso Xros 3 Mini Device
    • 0.6 Ohm Vaporesso Xros Pod
    • USB-C Charging Cable
    • User Manual