Best Seller Items
-
Vaporesso Vibe SE Vape Kit
The Vaporesso Vibe SE is a sleek and simple vape that’s ideal for anyone looking to bridge the gap between single-use devices and refillable pod kits. Although compact, it features a 1100mAh built-in battery that should last you a full day on one charge. Equipped with a dual mesh coil and two power modes, it delivers a familiar MTL (Mouth To Lung) inhale, just like a cigarette.
Features:
- 1100mAh Built-In Battery
- 0.6 Ohm & 0.8 Ohm Dual Mesh Coil
- MTL Vaping
- Inhale Activated
- Two Power Modes
- 2ml Side-Filling Pod
- 1A Charging Current
- USB-C Charging
To get started, fill your pod with e-liquid and insert it into the top of your device. Inhale on the mouthpiece to vape and it’ll produce smaller amounts of vapour, just like a cigarette, so it’s a great choice if you’re making the switch. It’s also ideal for those who prefer a lower level of vapour. To save battery, stick with ECO Mode, or opt for PWR Mode for a boost of flavour and more vapour production. When the time comes to recharge, plug in a USB-C cable.
The Vibe pod houses a 0.6 Ohm and 0.8 Ohm dual mesh coil. Thanks to the mesh design, it allows for more e-liquid to be heated at a faster rate to boost flavour and improve vapour production. As the coils are built-in, you can replace the whole pod with a new one once it starts to burn out. For best results, we’d recommend pairing this kit with a 50% VG e-liquid.
Please Note: This kit does not include a USB-C cable. If you don’t already own one, we’d recommend purchasing one separately.
Contains:
- Vaporesso Vibe SE Device
- Vibe Dual Mesh Coil Smart Pod
- Warranty Card
- User Manual
How To Set Up & Use The Vaporesso Vibe SE Vape Kit
Recharge Via USB-C
Charge your kit using a USB-C cable, this will take around an hour.
Remove Your Pod
Remove the pod from the kit and snap the mouthpiece off the pod.
Fill Your Pod
Insert the nib of your e-liquid bottle into the red fill port and top-up with 2ml of e-liquid.
Insert Pod
Insert your filled pod into the top of your device. The magnets will hold the pod in place.
Wait 10 Minutes
Wait up to 10 minutes for the e-liquid to soak into the coil. This is known as priming the coil to prevent dry hits.
Inhale To Vape
Inhale on the mouthpiece and this kit will produce a small amount of vapour.
The Vaporesso Vibe SE pod kit is powered by a built-in 1100mAh battery that can be recharged using a USB-C cable (sold separately).
Use Eco Mode to save your device’s battery, or go for PWR Mode to experience boosted flavour and better vapour production.
The Vaporesso Vibe SE pod kit is lightweight yet powerful device that’s ideal for beginner and expert vapers alike.
-
Vaporesso LUXE X COREX 2.0 Replacement Pods
VAPORESSO LUXE X COREX 2.0 PODS
Replacement pods featuring Vaporesso COREX 2.0 technology are only compatible with supported Vaporesso LUXE pod kits. Please check your device for compatibility before use.
Sold in packs of 2.
COREX 2.0
The latest Vaporesso COREX 2.0 technology features on the new upgraded LUXE COREX 2.0 pod cartridges, superseding the original Vaporesson LUXE X built-in coil pod. COREX 2.0 pods include upgraded Morph Mesh and COREX cotton, producing an explosive flavour with increased endurance.
Redesign
The Vaporesso LUXE X 0.6Ω and 0.8Ω pods have a thinner, narrower mouthpiece that is better suited to the shape of the mouth and perfect for tight-drawing mouth-to-lung (MTL) and restricted-direct-to-lung (RDTL) vaping.
The DTL 0.3Ω and 0.4Ω options continue the form of the original LUXE X pods with a wider mouthpiece for a freer, less-restricted draw.
Pod Styles
Vaporesso LUXE X pods are available in four resistances of built-in mesh coils, fillable at the base.
The 0.6Ω RDL and 0.8Ω MTL pods have a slimmer, narrower mouthpiece to replicate a tight-drawing inhalation.
Resistance and Vaping Style
0.3Ω MeshDTL0.4Ω Mesh (32W)DTL0.6Ω MeshRDL0.8Ω Mesh (16W)MTL
Specifications
LUXE X COREX 2.0 Pod
Capacity:2 ml (TPD)Coil:0.3Ω/0.4Ω/0.6Ω/0.8Ω Mesh built-inFilling:Bottom-fillingVaping StyleDTL/RDL/MTLDepending on what resistance of the pod, or pod type, the Vaporesso LUXE X replacement pods are recommended for use with High VG 70+ (DTL), 50/50 Freebase (MTL) and Nic Salt (MTL) E-Liquids.
Our guide on vaping styles explains the differences between mouth-to-lung (MTL) vaping and direct-to-lung (DTL) vaping.
To avoid premature coil failure, follow our coil priming guide.
-
Vaporesso Luxe X & XR Replacement Pod
Vaporesso Luxe X and Luxe XR replacement pods are designed for kits in the best-selling Luxe range, including the Luxe X, Luxe XR Max, Luxe X Pro and Luxe XR Max 2 vape kits. Take your pick from convenient pods with built-in coils, or go for the empty pods and pair them with your choice of Vaporesso GTX coil. With MTL (Mouth To Lung), RDTL (Restricted Direct To Lung) and DTL (Direct To Lung) options on offer, it’s easy to find your ideal level of vapour production.
Features:
- Vaporesso Luxe X & Luxe XR Replacement Pods
- Bottom-Fill Design
- MTL, RDTL & DTL Inhales
- Mesh Coil Build
- 0.3 Ohm – 0.8 Ohm Built-In Coil Resistances
- 0.2 Ohm – 1.2 Ohm Replaceable GTX Coil Resistances
Refilling your Luxe X or XR pod is easy – just remove the rubber stopper on the base to access the fill port. The versions of this pod that feature built-in coils reduce maintenance, as when the coil inside is finished you can simply swap out the entire pod. The empty pod options can be paired up with any GTX coil (sold separately), offering more resistances to choose from while being more budget-friendly and producing less waste.
Wondering which Luxe X pod to go for? For more information, see the Luxe X & Luxe XR pod compatibility guide below.
Luxe X And Luxe XR Pods Compatible Vape Kits
The Luxe X, Luxe X Pro, Luxe XR, Luxe XR Max, Luxe X2, Luxe XR Max 2 and Luxe X3 vape kits are compatible with the following built-in coil pods:
- 0.3 Ohm Mesh, 0.4 Ohm Mesh Luxe X pods, with 70% VG e-liquid
- 0.8 Ohm Mesh Luxe X pods, with 50% VG e-liquid
- 0.4 Ohm Ohm Corex 2.0, 0.6 Ohm Corex 2.0 and 0.8 Ohm Corex 2.0 Luxe X pods, with 50% VG e-liquid
They’re also compatible with the following replaceable coil pods:
- MTL Luxe XR pods, with 0.6 Ohm, 0.8 Ohm or 1.2 Ohm GTX coils and 50% VG e-liquid
- DTL Luxe XR pods, with 0.3 Ohm or 0.4 Ohm GTX coils and 70% VG e-liquid
Additionally, the Luxe XR Max and Luxe XR Max 2 only are also compatible with the following replaceable coil pods:
- DTL Luxe XR pods, with 0.15 Ohm or 0.2 Ohm GTX coils and 70% VG e-liquid
Contains:
- 2 x Vaporesso Luxe X Or XR Pods
-
Vaporesso Luxe Q Replacement Pods
The Vaporesso Luxe Q replacement pods will each hold up to 2ml of e-liquid and have been designed for use with the Vaporesso Luxe Q vape kit and the Vaporesso Luxe QS vape kit. These pods require little maintenance thanks to the built-in coil in each. There are four versions of the Luxe Q pods available, all of which use a mesh coil and are designed for MTL (Mouth To Lung) vaping.
Features
- Refillable 2ml Pods
- Built-In Mesh Coils
- Designed For MTL & RDTL Vaping
- SSS Leak-Resistant Technology
- Top-Filling
Featuring Vaporesso’s own “SSS” leak-resistant technology, they’re a more reliable option. These pods are also easy to refill thanks to the top-fill port which can be accessed by removing the mouthpiece. The 1.2 Ohm and 1.0 Ohm coils produce a small amount of vapour and better flavour thanks to the mesh build, while the 0.6 Ohm and 0.8 Ohm version produces more vapour.
Whichever pod you pick we recommend using a 50/50 or high PG e-liquid, with both nic salt and freebase nicotine e-liquid working well with these pods.
What Wattage Level Should I Use The Vaporesso Luxe Q Replacement Pod At?
- 0.6 Ohm – RDTL Vaping
- 0.8 Ohm – RDTL Vaping
- 1.0 Ohm – MTL Vaping
- 1.2 Ohm – MTL Vaping
-
Vaporesso Luxe X Dual Mesh Replacement Pods
VAPORESSO LUXE X DUAL MESH PODS
Replacement pods are for use with Vaporesso’s LUXE series pod & vape kits. Please check your device for compatibility before use.
These pods feature dual mesh coils to deliver peak flavour and aroma. Its leak-proof structure further extends the coil lifespan, prolonging your vaping bliss without compromising vaping quality.
Sold in packs of 2.
Dual Mesh Flavours
Pair your favourite nic salt or freebase e-liquid with the Luxe X3 for a deeper profile of your preferred tastes. The dual mesh technology guarantees a more full-bodied flavour journey, with a rich, satisfying pull with each puff.
Its advanced, reliable design further extends its lifespan, ensuring a longer-lasting, more consistent vaping experience.
Cleanly Refilled
The top of your included Luxe X Dual Mesh pod features the familiar top-filling design, ensuring a refilling experience as leak-free and clean as possible.
Specifications
Pod Capacity2mlResistance Options0.4Ω/ 0.6ΩRefill PortTop-filling designPack Size2 pods per pack -
Vaporesso LUXE X Dual Mesh Replacement Pod
Vaporesso LUXE X Dual Mesh Replacement Pod – Enhanced Flavour, Effortless Performance
The Vaporesso LUXE X Dual Mesh Replacement Pod is designed for vapers who demand consistent flavour, smooth airflow, and hassle-free performance from their device. Engineered specifically for the Vaporesso LUXE X3 Vape Kit and compatible LUXE X series devices, this replacement pod ensures your vape continues to perform at its best with minimal maintenance and maximum satisfaction.
Whether you’re replacing a worn pod or keeping spares on hand, the Vaporesso LUXE X pod delivers a refined vaping experience suitable for both beginners and experienced users alike.
Product Specification
Feature
DetailsBrand
VaporessoProduct Name
Vaporesso LUXE X Dual Mesh Replacement PodCompatible Devices
Vaporesso LUXE X Series / LUXE X3 Vape KitPod Capacity
2ml (TPD Compliant)Coil Type
Integrated Dual Mesh CoilVaping Style
MTL & RDL (Variant Dependent)E-Liquid Compatibility
Nicotine Salts & Freebase E-LiquidsRefill Method
Bottom Fill SystemMaterial
PCTG PlasticLeak Resistance
Enhanced Leak-Resistant DesignDesigned for the Vaporesso LUXE X Series
Built with Vaporesso’s attention to detail, it integrates seamlessly with the Vaporesso LUXE X3 Vape Kit, ensuring perfect compatibility and optimal performance. The precision-fit design eliminates leaks and guarantees stable airflow, so every puff feels smooth, controlled, and flavour-rich.
If you enjoy switching between flavours or vaping styles, having a dedicated replacement pod makes your experience cleaner and more convenient—no lingering taste, no mess, just fresh performance every time.
Advanced Dual Mesh Coil Technology for Superior Flavour
At the heart of the Vaporesso LUXE X Dual Mesh pod is advanced dual mesh coil technology, designed to enhance both flavour clarity and vapour consistency. The mesh structure heats e-liquid evenly, reducing dry hits while maximising taste delivery from the first draw to the last.
Key benefits of dual mesh coils include:
-
Faster and more even heating
-
Improved flavour intensity
-
Smoother vapour production
-
Longer coil lifespan compared to traditional coils
This makes the pod ideal for everyday vaping, especially for users who value clean flavour and dependable performance.
Optimised for MTL and RDL Vaping Styles
The Vaporesso LUXE X Dual Mesh Replacement Pod is perfect for both Mouth-To-Lung (MTL) and Restricted Direct Lung (RDL) vaping styles, depending on the pod resistance variant used. Whether you prefer a cigarette-like inhale with nicotine salts or a slightly airier draw with freebase e-liquids, this pod adapts effortlessly to your preference.
Its well-balanced airflow ensures a smooth draw without turbulence, making it an excellent choice for transitioning smokers or vapers looking for flexibility without complexity.
Leak-Resistant, User-Friendly Design
Nobody enjoys dealing with leaking pods. Vaporesso has addressed this with a leak-resistant pod structure, built using high-quality PCTG materials for durability and clarity. The transparent design allows you to monitor e-liquid levels at a glance, helping prevent dry hits and coil burnout.
Refilling is quick and simple, making this pod suitable for users of all experience levels. Just fill, click into place, and vape—no adjustments, no fuss.
Compatible with a Wide Range of E-Liquids
The Vaporesso LUXE X Dual Mesh Replacement Pod works exceptionally well with:
-
Nicotine salts for smooth throat hits and fast nicotine satisfaction
-
Freebase e-liquids for fuller vapour and bold flavour
This versatility makes it ideal for vapers who like to switch between different e-liquid types without changing devices.
Why Choose the Vaporesso LUXE X Dual Mesh Replacement Pod?
-
Designed for the Vaporesso LUXE X3 Vape Kit
-
Dual mesh coil for enhanced flavour and vapour
-
Suitable for MTL and RDL vaping styles
-
Leak-resistant and durable construction
-
Easy refill and maintenance-free design
-
Perfect for daily use or as a backup pod
Ideal for Everyday Vaping and Reliable Spares
Whether you’re replacing an old pod or stocking up for convenience, the Vaporesso LUXE X Dual Mesh Replacement Pod ensures your device continues to perform at its peak. It’s the ideal solution for maintaining flavour quality, vapour consistency, and overall vaping satisfaction.
Upgrade your vaping experience today with a genuine Vaporesso replacement pod—engineered for reliability, built for flavour, and trusted by vapers worldwide.
-
-
Vaporesso Luxe XR Max Kit (Single Pod Version)
The Vaporesso Luxe XR Pod Vape Kit is an incredibly adaptable and flexible pod vaping kit, catering for all three vaping styles with a vast choice of MTL, RDL and DTL coil options within the Vaporesso GTX coil series.
The Luxe XR packs a huge 2800 mAh built-in battery, powering Vaporesso’s AXON chip technology for a whole day of vaping with up to 80 watts of power, and is made easy to use with its large 0.54″ OLED screen. The kit is supplied with both a DTL and RDL pod, along with compatible DTL 0.2Ω Mesh and RDL 0.4Ω coils.
Specifications
Dimensions: 106.5 x 32.1 x 26 mm
POD Capacity: 2ml(TPD)
Compatible POD:
LUXE X 0.4Ω MESH POD
LUXE X 0.6Ω MESH POD
LUXE X 0.8Ω MESH POD
LUXE XR POD (DTL)
LUXE XR POD (MTL)
Battery Capacity: 2800mAh
Output Power: 80W MAX
Charging Current: DC 5V/2A,Type-C
Display: 0.54“ OLED Screen, 2 * RGB LED LightContents:
1 x VAPORESSO LUXE XR MAX Battery
1 x VAPORESSO LUXE XR POD (DTL)
1 x GTX 0.2Ω MESH COIL
1 x GTX 0.4Ω MESH COIL
1 x TYPE-C Cable
1 x User Manual & Warranty Card -
Vaporesso XROS 4 Mini Pod Kit
VAPORESSO XROS 4 MINI POD KIT
Vaporesso has expanded its XROS series to include the progressive XROS 4 Mini, a stylish and simple pod vape kit perfect for beginner vapers seeking robust and satisfying flavours. With a sleek, purely aluminium body, the XROS 4 Mini packs an incredible 1000 mAh battery, further assisted by super-fast USB Type-C charging. The XROS 4 Mini pod kit is ideal for newer vapers, as it eliminates toggle complexities with an auto-draw function, a simple airflow slider, and vibrant RGB lights that indicate its current power status.
Furthermore, Vaporesso designed the XROS 4 Mini with a pre-installed 0.6Ω XROS Pod, but the device also supports the XROS COREX 2.0 & COREX 3.0 platforms, catering to a wide range of vaping preferences. This version utilises their next-gen COREX 2.0 technology, fully optimised for either nic salt or freebase e-liquids. It delivers a fantastic mouth-to-lung (MTL) or restricted-direct-to-lung (RDL) experience.
Key Features
Vaporesso’s XROS 4 Mini pod kit features a range of convenient options designed to enhance your vaping experience.
- Included 0.4Ω XROS 2ml top-filling pod
- Precise airflow adjustments
- Compatibility with XROS Pod series
- COREX 2.0 aroma reproduction
- Immense 1000 mAh battery
Colours
With its portable and ergonomic body, Vaporesso fashioned the XROS 4 Mini pod kit to accompany you seamlessly throughout your day. In an enchanting range of 13 colourways, the XROS 4 Mini showcases a stylish kit perfect for on-the-go vaping.
- Black
- Space Grey
- Ice Blue
- Ice Green
- Ice Purple
- Ice Pink
- Champagne Gold
- Camo Silver
- Camo Red
- Camo Yellow
- Motor Race
- Pink City
- Word Po
Design
Among Vaporesso’s immense range of pod kits, the XROS 4 series, including the XROS 4 Mini, stands out with its purely aluminium unibody chassis built for the superior feel and seamless fit within the avid vaper’s lifestyle. Its material structure boasts a comfortable grip and is designed for wear-and-tear resistance, making it a pleasure to hold and use.
Battery
Despite its compact and stylish design, the XROS 4 Mini pod kit packs a powerful punch with its immense 1000 mAh battery, which provides uninterrupted hours of vaping. Vapers can experience longer periods of vaping bliss while on the move without the necessity of frequent recharging.
-
Vaporesso XROS 3 Mini Pod Kit
VAPORESSO XROS 3 MINI POD VAPE KIT
The Vaporesso XROS 3 Mini pod kit is a small, compact and discreet pod starter kit featuring a large 1000 mAh internal battery with an intelligent battery life indicator and offers various styles of vaping, from tight MTL to a looser RDTL inhale.
The XROS 3 Mini Pod kit includes a 0.6Ω XROS Original series pod cartridge, but is fully compatible with the XROS COREX 2.0 and XROS COREX 3.0 replacement pods for further utility. Choose your perfect vaping style through a wide range of premium-quality dual mesh refillable pods.
XROS Family
The XROS 3 Mini system allows vapers to use a straightforward MTL pod system, with the added flexibility of restricted direct-to-lung vaping through a more free and open inhale, achieved using the 0.6Ω pod option.
With a 1000 mAh high-density battery and COREX heating tech, the XROS 3 Mini pod system is the best within the XROS family of pod devices.
Flawless, rounded-edge design
The XROS 3 Mini pod kit features a mouthpiece shaped to be more flat and perfectly suited to fit the user, providing a more accurately tight MTL experience.
The sleek, slim design of the XROS 3 presents a premium and modern look, with comfortability delivered in the palm of your hand.
XROS 3 and XROS 3 Mini Pods
The XROS series of replacement pods already feature 0.8Ω and 1.2Ω MTL pod choices, with top-filling and Mesh coil features.
New to the series is a 1.0Ω addition to the tighter MTL experience and a 0.6Ω RDTL option, offering a more free inhale while still benefiting from the flavour production that the XROS is renowned for. XROS pods offer the assurance of a leak-proof experience with SSS Leak-Resistant technology.
Nic Salt and Free Base
All four XROS pod options are designed for use with both Freebase and Nic Salt e-liquids, with the 0.6Ω pod being designed to provide a sweeter experience with free base e-liquids.
High-density battery
The XROS 3 Mini might be mini by nature, but with a huge internal 1000 mAh high-density battery, the XROS mini delivers a consistent all-day vaping experience.
Oh. So. Powerful.
Don’t be fooled by the XROS’ size, as the innovative COREX heating technology applied with a unique morph-mesh coil structure ensures a more rapid and even heating system to vaporise your e-liquid to provide full flavour potential efficiently.
XROS pod technology provides higher liquid delivery through the use of fluffier cotton material, preventing a burnt taste from a shortage of e-liquid and extending the pod’s longevity by up to 50%.
-
Vaporesso Xros 5 Mini Vape Kit
The Vaporesso Xros 5 Mini vape kit is a compact vape that’s easy to use for new and experienced vapers alike. The built-in 1500mAh battery is big enough to last at least a full day on a single charge and it can be recharged in under an hour. The Vaporesso Xros pod included will produce a small amount of vapour to deliver an MTL (Mouth To Lung) inhale that feels like a more cigarette, and thanks to the range of compatible pod options this kit can also support RDTL (Restricted Direct To Lung) vaping.
Features:
- 1500mAh Built-In Battery
- MTL & RDTL Vaping
- Inhale Activated
- Adjustable Airflow
- 2ml Refillable Pod
- Built-In Corex 2.0 Mesh Coil
- USB-C 2A Fast Charging
Getting set up is simple – just fill the included pod and insert it into your device. The kit will automatically detect which pod you’ve chosen and output the best power level to match. For more customisation, you can adjust the airflow slider on the side of the device to experience a tighter or looser inhale. The LED indicator will let you know when your vape is low on battery. Plug it in with the included USB-C cable and it will recharge in less than an hour.
The Xros 5 Mini is compatible with all of the Xros Corex refillable pods. As each pod features a built-in coil, when it burns out you can just swap the pod out for a new one. The included 0.6 Ohm pod works best with 50% VG e-liquid. The 0.4 Ohm pod, sold separately, is best paired with 70% VG e-liquid.
What Pods Can I Use With The Vaporesso Xros 5 Mini?
The Vaporesso Xros 5 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W), 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 5 Mini Device
- 0.6 Ohm Xros Corex Pod
- USB-C Charging Cable
- User Manual
How To Set Up & Use The Vaporesso Xros 5 Mini Vape Kit
Charge Your Xros 5 Mini
With the included USB-C cable, you can recharge your Xros 5 Mini in less than an hour. The LED indicators on the front of the device will display your battery charge level.
Remove Your Xros 5 Mini Pod
Pull the pod out of the device.
Prepare Your Xros 5 Mini Pod
Peel the sticker from the base. Remove the mouthpiece.
Fill Your Xros Pod.
The fill port is marked with a red silicone ring. Fill the pod with vape juice.
Insert Your Xros 5 Mini Pod
Replace the mouthpiece and slide the pod into the device.
Prime Your Xros Pod
Wait ten minutes before you vape for your coil to “prime”, allowing e-liquid to fully soak into the cotton. This boosts flavour and makes your pod last longer.
Vape Your Xros 5
Press and hold the button or inhale on the mouthpiece to vape.
Adjust Your Airflow
Use the airflow slider on the side of the device to swap between a tighter or looser inhale.
The Vaporesso Xros 5 Mini is powered by a hefty 1500mAh battery that should last you at least a day before needing to be recharged.
Vaporesso Xros Corex 2.0 replacement pods feature built-in mesh coils. The wider surface area allows for more e-liquid to be heated for a boost of flavour and better vapour production.
The Xros 5 is compatible with the full range of Corex 2.0 replacement pods. For best results, we recommend using a 50% VG e-liquid with the included pods.
The Xros 5 Mini features Smart Mode that will automatically read the resistance of your chosen pod and selects the correct wattage to vape at.
Swap from a restricted MTL inhale to a loose RDTL inhale by adjusting the airflow slider on the side of the device.
-
Vaporesso Xros 3 Mini Vape Kit
The Vaporesso Xros 3 Mini vape kit is designed with simplicity in mind and is an ideal option for first time switchers. Its built-in 1000mAh battery is capable of supporting lengthy sessions of vaping. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which eliminates the need for messy coil changes thanks to featuring an integrated RDTL (Restricted Direct To Lung) coil.
Features:
- RDTL Vaping
- Built-In 1000mAh Battery
- Inhale Activated
- 2ml Refillable Pods
- Integrated Coils
With inhale activation technology, there are no buttons or menus to contend with. All you have to do is puff on the mouthpiece, which will create a moderate amount of vapour for an RDTL vape that has a tighter feeling draw. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour.
Xros pods feature a top-filling design and are easily refilled via the filling port located underneath the mouthpiece; you don’t even have to remove them from your device when refilling. The mesh build of the coils inside means the e-liquid heats up faster for better flavour. We recommend pairing this kit with 50% VG e-liquid or higher PG options.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
What Pods Can I Use With The Vaporesso Xros 3 Mini?
The Vaporesso Xros 3 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros 3 Mini Device
- 0.6 Ohm Vaporesso Xros Pod
- USB-C Charging Cable
- User Manual
How To Set Up And Use The Vaporesso Xros 3 Mini Kit
Remove The Xros 3 Mini Mouthpiece
Take the Xros pod out of your kit and remove the black mouthpiece by clicking it away from you – the easiest way to do this is to hold the device in your hand and use your thumb to push the mouthpiece off.
Fill The Vaporesso Xros 3 Mini Pod
Fill your pod by putting the nib of your e-liquid bottle into the hole ringed with red rubber.
Reassemble Your Xros 3 Mini Pod
Once your pod has been refilled, replace the mouthpiece. You’ll hear a click when the mouthpiece has been securely attached.
Prime Your Xros 3 Coil
Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid, which helps it last longer and boosts flavour.
Vape Your Xros 3 Mini
Inhale on the mouthpiece to vape. You’ll experience a small amount of vapour for an MTL inhale.
Charge Your Xros 3 Mini
We recommend charging your kit before you use it. Using the included USB-C cable, a full charge should take around an hour.
Thanks to its 1000mAh battery, the Vaporesso Xros 3 Mini can support long sessions of vaping in between charges.
The Vaporesso Xros pods are easily filled from the top and feature leak-resistant technology to cut down on mess.
The Vaporesso Xros 3 Mini vape kit boasts an eye-catching, innovative gradient design that’s aesthetically pleasing, so you can vape in style.
-
Vaporesso Xros 4 Mini Vape Kit
The Vaporesso Xros 4 Mini pod kit is perfect if you’re looking for a compact yet versatile device. Its sturdy aluminium design houses a 1000mAh built-in battery that’s big enough to last most vapers all day and with USB-C fast charging, it can be fully recharged in as little as 30 minutes. Thanks to its adjustable airflow and compatibility with the Xros pod range, you can swap between MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping with ease.
Features:
- Inhale Activated
- Built-In 1000mAh Battery
- 16W Max Power Output
- For MTL & RDTL Vaping
- Smart Mode
- Adjustable Airflow
- Compatible With All Xros Pods
To get started with the Xros 4 Mini, just insert your pod and Smart Mode will automatically recognise your coil and select the best power output. Fill your pod, then simply inhale on the mouthpiece to vape. Use the airflow slider to control how tight or loose each puff feels. A handy indicator light on the face of the device will help you keep track of your battery life so you know when it’s time to recharge.
To refill your Xros pod, remove the mouthpiece and top it up with 2ml of e-liquid. Xros pods include a built-in Corex mesh coil that’ll heat vape juice quickly and evenly to improve flavour. Within the Xros pod range, there are plenty of resistances between 0.4 Ohm and 1.2 Ohms to pick from, so it’s easy to find your perfect inhale. All Xros pods can be paired with 50% VG blends, while the lower resistance 0.4 Ohm pods can also be used with 70% VG e-liquid.
What Pods Can I Use With The Vaporesso Xros 4 Mini?
The Vaporesso Xros 4 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 4 Mini Device
- 0.6 Ohm Xros Corex Pod (Pre-Installed)
- USB-C Charging Cable
- Reminder Card
- User Manual
How To Set Up & Use The XROS 4 Mini Kit
Charge Your Device
Plug in the included USB-C charging cable into the port at the base of the kit to charge the device.
Prepare Pod For Filling
Remove the pod from the kit and remove the mouthpiece from the pod.
Fill Pod
Fill your pod, the fill port is marked with a red seal.
Replace Pod And Mouthpiece
Put the mouthpiece back on the pod and insert the pod back into the kit. Leave it to stand upright for a few minutes to let the liquid soak in.
Inhale To Vape
Smart Mode will automatically detect what pod you’re using, so just inhale on the mouthpiece to vape.
Adjust Airflow
You can switch between MTL and RDTL vaping by adjusting the airflow on the side of the device.
The Vaporesso Xros 4 Mini vape kit features an adjustable airflow, so you can effortlessly switch between a tight or loose inhale with a slider at the back.
Thanks to a handy LED indicator, you can easily keep track of how much battery life your Vaporesso Xros 4 Mini vape kit has left.
While compact, the Vaporesso Xros 4 Mini vape kit still manages to fit a built-in 1000mAh battery, which will last most vapers up to a day on a single full charge.
-
Vaporesso Xros Mini Pod Vape Kit
The Vaporesso Xros Mini pod kit is designed for easy, day-to-day vaping and is ideal for first time switchers too. The 1000mAh battery is able to support up to a day’s worth of vaping, even at its 16W max power. That means you’re less likely to get caught out with no battery. As well as the device itself, in your kit you’ll also find a 2ml refillable Xros pod with a built-in MTL (Mouth To Lung) coil. You don’t have to worry about messy coil changes, as the pod design means you can just replace the pod when needed.
Features:
- MTL Pod Kit
- Long-Lasting 1000mAh Battery
- Inhale Activated
- Fixed 11W / 16W Power Output
- 2ml Refillable Pods
- Built-In Coils
With no need for a complicated menu system, the Xros Mini detects which pod you’ve chosen and sets the wattage to either 16W or 11W accordingly. It makes your kit simpler to use, as you don’t have to figure out wattages or settings to vape. Whether the 1.2 Ohm, or the 0.8 Ohm pod (sold separately), is being used, you’ll experience full flavour and a discreet amount of vapour production for an MTL inhale.
The 2ml Xros pod is easily topped up via the filling port located underneath the mouthpiece. The 1.2 Ohm pod allows your kit to deliver a discreet inhale that’s closer to the feel of a cigarette. If you prefer an airier vape, Xros pods are available in a wide range of lower resistances that will produce increased levels of vapour. When it comes to e-liquid, you can take your pick from our massive selection of high PG and 50/50 vape juices.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
What Pods Can I Use WIth The Vaporesso Xros Mini?
The Vaporesso Xros Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros Mini
- 1.2 Ohm Xros Pod
- Type-C USB Cable
- User Manual
How To Set Up & Use My Vaporesso Xros Mini Kit
How To Charge Your Xros Mini Kit
Make sure your kit is fully charged before using it for the first time. You can use the USB cable included, with a full charge taking up to an hour from 0%.
Remove The Xros Pod Mouthpiece
To get your pod ready for filling, remove the black mouthpiece. You won’t need any tools, but if it’s a little stuck try putting the pod in your kit.
Fill Your Xros Pod
With the mouthpiece removed, you’ll be able to see two holes. Fill your pod via the hole with the black underlay – do not refill via the centre hole.
Reassemble Your Kit
Re-attach the mouthpiece to your pod. Again, if it’s tricky to put on, try inserting the pod into your kit first. Push down until you hear a click.
Prime Your Xros Coil
Stand your kit upright and leave it for ten minutes. This gives the e-liquid inside your pod time to soak into your coil, also known as ‘priming’ your coil.
Unlock & Vape Your Vaporesso XROS
Now that your coil is primed, click the kit’s button five times to unlock it. When unlocked, push the button again to vape.
The Vaporesso XROS Mini pod vape kit combines a small build with a simple design, making it the ideal choice for discreet vaping on the go.
Featuring a built-in 1000mAh battery, the XROS mini lasts longer between charges – supporting up to a full day of vaping.
The newly designed XROS pod comes as standard with this kit, featuring a 1.2 Ohm coil it creates a small amount of vapour for an MTL vape.
-
Vaporesso XROS Pro Pod Kit
VAPORESSO XROS PRO POD KIT
Vaporesso’s XROS Pro pod system is the ultimately refined pod vaping system. It features adjustable power of up to 30W, a substantial 1200 mAh battery capacity that can be fully charged in just 35 minutes, and a Super Pulse Mode that ensures a consistently powerful output.
The XROS Pro utilises the Vaporesso XROS Corex 2.0 pod series, but is fully compatible with the COREX 3.0 refillable pod. The kit includes 0.6Ω and 0.8Ω pods to deliver a smooth but intense restricted-direct-lung (RDL) flavour experience.
Combined with nicotine salt e-liquids, the adjustable airflow on the XROS Pro can be fully customised to every vaper and their preferences for nicotine ingestion.
Highlights
- Super Pulse mode
- Up to 30w precision power and airflow control
- 0.4Ω Top-filling pod
- Fire key lock button
- 2A 1200 mAh 35-minute full-charge battery
Overview
Vaporesso’s XROS Pro is the first pod system to feature a 0.4Ω pod with adjustable power up to 30w in the XROS Series, offering a restricted-direct-lung (RDL) pod vaping experience.
Crossing the limits to the pro experience of excellent flavour production, XROS Pro features AXON Super Pulse mode and COREX Heating Tech. The refined operation, display and button control ensure a stress-free experience with easy top-fill pods, a large 1200 mAh battery, and ultra-convenient XROS pod choices in five different resistances for multiple mouth-to-lung (MTL) vaping experiences.
Battery
The XROS Pro features Vaporesso’s biggest-ever XROS battery capacity, boasting 1200 mAh, a 200 mAh increase on its predecessor. 2A rapid charging capabilities see a 50% decrease in the time spent charging the device.
Style
Choose from nine different colours of XROS Pro pod systems, all with individual styles and looks.
- Black
- Silver
- Blue
- Red
- Green
- Orange
- Pink
- Purple
- Champagne Gold
Display
The XROS Pro is Vaporesso’s first XROS pod system with a display screen, that intuitively shows your wattage level, puff count and battery level when using the 0.4Ω XROS Pod.
The remaining four XROS pod options with differing resistances will display ECO/Normal/Power mode instead of wattage level.
Adjustment
The XROS Pro can be customised for flavour through ultra-precision power control. Adjust your wattage using three clicks of the fire button in 0.5w increments with the 0.4Ω XROS pod.
Slide and adjust the airflow with precision.
Operation
With one single button, the Vaporesso XROS Pro is easy to operate, and different operations can be performed by clicking the fire button.
2 Clicks:RGB Light3 Clicks:Wattage adjustment and Mode selection4 Clicks:Clear puff counter
Slide-lock
An industry first sees Vaporesso implement a slide-lock button allowing you to lock the fire button by sliding the side button upward and unlock it by sliding it downward. This simple feature prevents vapers from accidentally firing the device through the switch but still allows for auto-draw activation, even when the lock is engaged.
Activation
The XROS Pro can deliver a superior flavour through button or draw activation, depending on your preference.
Enhance
Vaporesso’s XROS 0.4Ω with COREX technology delivers denser clouds with a smoother taste and pronounced throat hit. Accurate flavour is consistently delivered through COREX Heating Tech with a longer lifespan.
The XROS Pro pod system pioneers the application of Super Pulse mode, once exclusive to a tank mod but now debuting in their pod system. This special mode ensures a consistently powerful output better than ever, from full to low battery levels.
XROS Pods
The XROS Corex 2.0 series of replacement pods already features 0.8Ω and 1.2Ω MTL pod choices, easy top-filling, anti-leaking, and mesh coil features.
In addition to these, the series offers a 1.0Ω for a tighter MTL vape, along with a 0.6Ω RDTL option, delivering a more free inhale while still benefiting from the flavour production that the XROS is known for, and a new powerful 0.4Ω DTL pod for a full direct-to-lung (DTL) experience.
Resistance and Power
The XROS series of pods offers five different top-filling pod choices, which are compatible across the XROS range of vaping devices.
Due to its higher power constraints, the 0.4Ω XROS pod option is only compatible with the XROS Pro, XROS 4 and XROS 4 Mini pod vape kits.
0.4ΩBest 25w (only compatible with XROS PRO, XROS 4 and XROS 4 Mini)0.6ΩBest: 21w0.8ΩBest: 16w1.0ΩBest: 12w1.2ΩBest: 10w
-
Vaporesso Xros Pro Vape Kit
The Vaporesso Xros Pro pod kit is an ideal option if you want a vape that’s full of features yet still easy to use. Housing a 1200mAh battery (that can be recharged in 35 minutes) in its sturdy, compact body, it’s capable of delivering a 5-30W output that’s ideal for MTL (Mouth To Lung), RDTL (Restricted Direct To Lung) and DTL (Direct To Lung) vaping. This, along with a range of built-in coil pods, makes the Xros Pro easy to tailor. Each kit includes two pods, so you’ll have everything you need to get started.
Features:
- 1200mAh Built-In Battery
- Inhale & Button Activated
- MTL, RDTL & DTL Vaping Styles
- 5-30W Output Range
- Smart & Variable Wattage Modes
- Adjustable Airflow
- 2ml Top-Filling Pods
- 0.4 Ohm – 1.2 Ohm Xros Pod Resistances
Setting up your Xros Pro is easy. Equipped with Smart mode, it recognises whichever coil is in your pod and will output the best wattage for it, for a no-fuss vape. Pair your kit with the included Xros pods and swap between longer battery life (Eco Mode), a balanced vape (Normal Mode) or the strongest vape possible (Power Mode). Or, if you’re looking for a little customisation, the 0.4 Ohm Xros pod which is available separately allows you to finetune the wattage output for your perfect inhale.
Xros pods feature a handy top-fill design that means you don’t even need to remove them from the device to top them up. Just lift off the mouthpiece to reveal the filling port. The built-in coil design means maintenance is simple – once the flavour begins to fade or you notice a burnt taste, simply replace the whole pod. Furthermore, the mesh design of the coils heats your e-liquid faster, boosting its flavour. Speaking of e-liquid, Xros pods will work best with 50/50 and high PG vape juice – the 0.4 Pro pod can also be used with 70% VG e-liquid.
Read our Vaporesso Xros Pro vape kit review for even more information and expert opinions to find out whether this vape is right for you.
What Pods Can I Use WIth The Vaporesso Xros Pro?
The Vaporesso Xros Pro is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros Pro Vape Device
- 1 x Vaporesso Xros 0.6 Ohm Pod
- 1 x Vaporesso Xros 0.8 Ohm Pod
- USB-C Charging Cable
- User Manual
How To Set Up And Use The Xros Pro Kit
Charge Your Xros Pro Kit
Using the included USB-C cable, you can fully charge your Xros Pro in about 35 minutes. The screen will display your charge level as well as how much charging time is left.
Prepare Your Xros Pro Pod
Take the pod out of the kit and remove the protective film from the base.
Fill Your Xros Pro Pod
Snap off the mouthpiece to access the fill port, marked with a red silicone ring. Fill the pod up with your e-liquid.
Prime Your Xros Pro Pod
Insert your pod into the device and wait ten minutes before you vape for your coil to “prime” – allowing e-liquid to fully soak into the cotton, improving flavour and coil longevity.
Switch Your Xros Pro On
Press the main button 5 times to turn on your vape kit.
Vape Your Xros Pro
You’re ready to start vaping! Inhale on the mouthpiece or press and hold the power button to vape.
Adjust The Power Level On The Xros Pro
Your device will automatically select the best power level for your chosen pod. You can also press the power button three times to swap between Eco, Normal and Power mode or unlock wattage controls (for the 0.4 Ohm pod).
The Xros Pro’s adjustable airflow and power control allow for a customisable vape.
The 0.4 Ohm pod supports Variable Wattage, while other pods support a variety of vaping modes.
Single button operation means the Xros Pro is easy to use, despite being full of features.
For extra peace of mind, you can lock the Xros Pro’s fire button using the slider.
Thanks to USB-C charging, the Xros Pro recharges quickly. Plus, it boasts a bigger battery capacity than previous Xros models.
