-
Vaporesso Xros 3 Nano Vape Kit
The Vaporesso Xros 3 Nano vape kit is designed to be as easy to use as possible and is a good choice for new and seasoned vapers alike. Its built-in 1000mAh battery will last most vapers up to a day before needing to be recharged and supports the device’s power output range of 11–16W. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which removes the need for messy coil changes thanks to its built-in coil.
Features:
- RDTL Vaping
- Built-In 1000mAh Battery
- Inhale Activated
- Adjustable Airflow
- 2ml Refillable Pods
- Built-In Coils
Thanks to Smart Mode, your device will detect the resistance of your pod’s built-in coil and automatically select the best wattage to match it — making setup quick and easy. Since this kit is inhale activated, you don’t have to deal with any buttons or menus. Just inhale on the mouthpiece and the device will create a moderate amount of vapour for an RDTL (Restricted Direct To Lung) inhale. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour. Thanks to an airflow adjustment switch, you can switch between a tighter or looser draw with ease. Beyond that, it also features Pulse Mode, which delivers a powerful vape and keeps it consistent.
The included Xros pods feature a top-filling design and can be easily refilled via the filling port located underneath the mouthpiece; which means you don’t have to remove them from your kit when topping up. The mesh build of the coils inside means that your e-liquid is heated up at a faster rate, improving the flavour. We recommend pairing this kit with 50/50 e-liquid or higher PG options. The Xros 3 Nano is also compatible with the prefilled Deliciu Mate pods.
Please note: This kit is compatible with all Xros replacement pods other than the Xros Pro versions, which can only be used with the Xros Pro kit.
Contains:
- Vaporesso Xros 3 Nano Vape Device
- 0.6 Ohm Vaporesso Xros Pod (Pre-installed)
- 0.8 Ohm Vaporesso Xros Pod (Spare)
- USB-C Charging Cable
- User Manual
- Lanyard
Thanks to compatibility with the whole Xros pod range, the Vaporesso Xros 3 Nano vape kit will work with both nic salt and freebase e-liquid.
The Vaporesso Xros 3 Nano vape kit features Pulse Mode, which elivers a powerful vape and keeps it consistent — even at low battery.
The Vaporesso Xros pods feature a simple top-filling design, so you don’t even have to remove them from your device to top them up.
The Vaporesso Xros 3 Nano vape kit features an airflow adjustment switch, so you can switch between a tighter or looser draw with ease to tailor the feel of your inhale.
-
Vaporesso Xros 3 Mini Vape Kit
The Vaporesso Xros 3 Mini vape kit is designed with simplicity in mind and is an ideal option for first time switchers. Its built-in 1000mAh battery is capable of supporting lengthy sessions of vaping. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which eliminates the need for messy coil changes thanks to featuring an integrated RDTL (Restricted Direct To Lung) coil.
Features:
- RDTL Vaping
- Built-In 1000mAh Battery
- Inhale Activated
- 2ml Refillable Pods
- Integrated Coils
With inhale activation technology, there are no buttons or menus to contend with. All you have to do is puff on the mouthpiece, which will create a moderate amount of vapour for an RDTL vape that has a tighter feeling draw. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour.
Xros pods feature a top-filling design and are easily refilled via the filling port located underneath the mouthpiece; you don’t even have to remove them from your device when refilling. The mesh build of the coils inside means the e-liquid heats up faster for better flavour. We recommend pairing this kit with 50% VG e-liquid or higher PG options.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
What Pods Can I Use With The Vaporesso Xros 3 Mini?
The Vaporesso Xros 3 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros 3 Mini Device
- 0.6 Ohm Vaporesso Xros Pod
- USB-C Charging Cable
- User Manual
How To Set Up And Use The Vaporesso Xros 3 Mini Kit
Remove The Xros 3 Mini Mouthpiece
Take the Xros pod out of your kit and remove the black mouthpiece by clicking it away from you – the easiest way to do this is to hold the device in your hand and use your thumb to push the mouthpiece off.
Fill The Vaporesso Xros 3 Mini Pod
Fill your pod by putting the nib of your e-liquid bottle into the hole ringed with red rubber.
Reassemble Your Xros 3 Mini Pod
Once your pod has been refilled, replace the mouthpiece. You’ll hear a click when the mouthpiece has been securely attached.
Prime Your Xros 3 Coil
Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid, which helps it last longer and boosts flavour.
Vape Your Xros 3 Mini
Inhale on the mouthpiece to vape. You’ll experience a small amount of vapour for an MTL inhale.
Charge Your Xros 3 Mini
We recommend charging your kit before you use it. Using the included USB-C cable, a full charge should take around an hour.
Thanks to its 1000mAh battery, the Vaporesso Xros 3 Mini can support long sessions of vaping in between charges.
The Vaporesso Xros pods are easily filled from the top and feature leak-resistant technology to cut down on mess.
The Vaporesso Xros 3 Mini vape kit boasts an eye-catching, innovative gradient design that’s aesthetically pleasing, so you can vape in style.
The Vaporesso Xros 3 Mini vape kit is compatible with the entire Xros range of pods, so it can support both MTL and RDTL vaping.
-
Vaporesso Xros 3 Vape Kit
The Vaporesso Xros 3 vape kit is a straightforward option that is ideal for new vapers, and its built-in 1000mAh battery can support long vaping sessions. The kit comes complete with a 2ml refillable Xros pod that has a RDTL (Restricted Direct To Lung) coil built in, which eliminates the need for messy coil changes. It also includes a spare MTL (Mouth To Lung) pod in the box, so you can switch up your inhale style.
Features:
- RDTL & MTL Vaping
- Built-In 1000mAh Battery
- 16W Max Power Output
- Single Button Activation
- Pulse Mode
- 2ml Refillable Pods
- Integrated Coils
Thanks to single button activation, there are no menus or screens to contend with, unlock the kit with five clicks and start vaping by either pressing the button or just inhaling on the mouthpiece. Just puff on the mouthpiece of your Xros 3 and it will create a small amount of vapour for an MTL vape with the 1.0 Ohm pod installed. The 0.6 Ohm pod creates a moderate amount of vapour with a tighter draw, allowing for an RDTL vape. Thanks to its AXON chip, it also features Pulse Mode, which intensifies the power and flavour of your vape.
The Xros pod has a top-filling design and you can easily refill it via the port located underneath the mouthpiece; you don’t even have to remove it from your device. It also features leak-resistant technology to cut down on mess. Thanks to its adjustable airflow, you can switch between a tighter or looser draw for a vape that suits you. Plus, the mesh design of the built-in coils heats up your e-liquid faster for better flavour. We recommend pairing either of the included pods with 50% VG e-liquid or higher PG options. For a lower maintenance option, pair the Xros 3 with prefilled Deliciu Mate pods.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
Contains:
- Vaporesso Xros 3 Device
- 0.6 Ohm Vaporesso Xros Pod (Pre-Installed)
- 1.0 Ohm Vaporesso Xros Pod
- USB-C Charging Cable
- User Manual
How To Set Up & Use Your Vaporesso XROS 3 Kit
Charge Your XROS 3
Equipped with a long-lasting 1000mAh battery, make sure your kit is fully charged before using it. You can use the included cable and a full charge takes about an hour.
Remove The XROS 3 Mouthpiece
Take the XROS pod out of your kit and then remove the black mouthpiece. You won’t need any tools, just push against the mouthpiece until it clicks off.
Fill The Vaporesso XROS 3 Pod
With the mouthpiece removed, you’ll be able to see the filling port on the pod. Put the nib of your e-liquid bottle into the hole with the red underlay to refill.
Reassemble Your XROS Pod
When it’s refilled, reattach the black mouthpiece to your pod. You can put it in the kit if this feels a little fiddly. Push the mouthpiece back on until you hear a click.
Prime Your XROS Coil
Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid and can help it last longer.
Unlock And Vape Your Vaporesso XROS 3 Kit
With the pod inserted into your kit you’re ready to go, click the kit’s firing button five times to unlock it. Press it again to vape and lock the kit when you’re done.
The Vaporesso Xros 3 vape kit is compatible with the entire Xros range of pods, so it supports both MTL and RDTL vaping.
Thanks to its intelligent AXON chip, the Vaporesso Xros 3 vape kit features Pulse Mode, which intensifies the power and flavour of your vape. *Please note that the estimated 48 hour battery life is based on average use.*
The Vaporesso Xros 3 vape kit features an adjustable airflow, so you can switch seamlessly between a tighter or looser draw.
The Vaporesso Xros pods are easily filled from the top and feature leak-resistant technology to cut down on mess.
-
Vaporesso XROS 3 Mini Pod Kit
VAPORESSO XROS 3 MINI POD VAPE KIT
The Vaporesso XROS 3 Mini pod kit is a small, compact and discreet pod starter kit featuring a large 1000 mAh internal battery with an intelligent battery life indicator and offers various styles of vaping, from tight MTL to a looser RDTL inhale.
The XROS 3 Mini Pod kit includes a 0.6Ω XROS Original series pod cartridge, but is fully compatible with the XROS COREX 2.0 and XROS COREX 3.0 replacement pods for further utility. Choose your perfect vaping style through a wide range of premium-quality dual mesh refillable pods.
XROS Family
The XROS 3 Mini system allows vapers to use a straightforward MTL pod system, with the added flexibility of restricted direct-to-lung vaping through a more free and open inhale, achieved using the 0.6Ω pod option.
With a 1000 mAh high-density battery and COREX heating tech, the XROS 3 Mini pod system is the best within the XROS family of pod devices.
Flawless, rounded-edge design
The XROS 3 Mini pod kit features a mouthpiece shaped to be more flat and perfectly suited to fit the user, providing a more accurately tight MTL experience.
The sleek, slim design of the XROS 3 presents a premium and modern look, with comfortability delivered in the palm of your hand.
XROS 3 and XROS 3 Mini Pods
The XROS series of replacement pods already feature 0.8Ω and 1.2Ω MTL pod choices, with top-filling and Mesh coil features.
New to the series is a 1.0Ω addition to the tighter MTL experience and a 0.6Ω RDTL option, offering a more free inhale while still benefiting from the flavour production that the XROS is renowned for. XROS pods offer the assurance of a leak-proof experience with SSS Leak-Resistant technology.
Nic Salt and Free Base
All four XROS pod options are designed for use with both Freebase and Nic Salt e-liquids, with the 0.6Ω pod being designed to provide a sweeter experience with free base e-liquids.
High-density battery
The XROS 3 Mini might be mini by nature, but with a huge internal 1000 mAh high-density battery, the XROS mini delivers a consistent all-day vaping experience.
Oh. So. Powerful.
Don’t be fooled by the XROS’ size, as the innovative COREX heating technology applied with a unique morph-mesh coil structure ensures a more rapid and even heating system to vaporise your e-liquid to provide full flavour potential efficiently.
XROS pod technology provides higher liquid delivery through the use of fluffier cotton material, preventing a burnt taste from a shortage of e-liquid and extending the pod’s longevity by up to 50%.
-
Vaporesso Xros 5 Nano Vape Kit
The Xros 5 Nano kit is ideal for both new and experienced vapers looking for something pocket-friendly and versatile. The built-in rechargeable battery should last for an entire day before it needs to be recharged. With an output range of up to 30W and compatibility with Xros Corex pods, this device can be used for both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. Two pods in different resistances are included with the kit to get you started.
Features:
- 1600mAh Built-In Battery (Charges in 50 Minutes)
- Up To 30W Power Output
- MTL & RDTL Vaping
- Inhale & Button Activation
- Three Power Levels
- Touch Screen
- Adjustable Airflow
- 2ml E-Liquid Capacity
- Compatible With Xros Corex Pods
- Top-Filling Pods
- Compatible With 50% VG E-Liquid
Setting up the Xros 5 Nano is simple. Fill a pod up with e-liquid and insert it into the device, and then inhale to vape. There are three power modes and you can use the touchscreen to swap between them. In Eco Mode, your kit produces a smaller amount of vapour and your battery will last for longer between charges. Normal Mode delivers a balanced vape, and Power Mode sends more power to the coil to boost flavour. The airflow slider allows you to adjust how loose or restricted each inhale is.
Xros pods feature a top-filling design and house mesh coils, which boost flavour by heating e-liquid quickly. This kit is compatible with all Xros pods, which are available in resistances from 0.4 Ohm to 1.2 Ohm. Lower resistance pods are made for RDTL vaping. Higher resistance pods are designed for MTL vaping and will create small amounts of vapour. We recommend pairing Xros pods with a resistance of 0.6 Ohm or higher with 50% VG e-liquid. The 0.4 Ohm pods, available separately, work best with high VG e-liquid.
What Pods Can I Use WIth The Vaporesso Xros 5 Nano?
The Vaporesso Xros 5 Nano is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 5 Nano Device
- 0.6 Ohm Xros Corex Pod
- 0.8 Ohm Xros Corex Pod
- USB-C Charging Cable
- User Manual
How To Set Up & Use The Vaporesso Xros 5 Nano Kit
Recharge via USB-C
Charge your Xros 5 Nano kit with the included USB-C cable via the charging port on the side of the device.
Remove pod and mouth piece to reveal fill port
Remove the pod from the device and pull off the black mouthpiece to reveal the fill port.
Fill via the red port on the top of the pod
Fill your pod with e-liquid via the red port.
Replace fill port cover and insert into battery
Click the mouthpiece back in place and insert the pod into the top of the device.
Wait 10 mins for the coil to prime
Wait 10 minutes before you vape to give the coil time to absorb e-liquid.
Inhale to activate
Inhale on the mouthpiece to start vaping.
Powered by a 1600mAh battery, the Xros 5 Nano will last most vapers all day, before recharging in less than an hour with the included USB-C cable.
The Xros 5 Nano is compatible with the full range of Xros pods with resistances ranging from 0.4 Ohm – 1.2 Ohm. Each kit includes a 0.6 Ohm and a 0.8 Ohm pod.
Designed with both MTL and RDTL vaping in mind, the Xros 5 Nano pairs best a 50% VG e-liquid.
The Xros 5 Nano offers 3 different power modes to choose from: Normal, Eco, and Power Mode.
The Xros 5 Nano features an easy-to-read touchscreen display that makes customising your kit easy.
-
Vaporesso Xros 4 Vape Kit
The Vaporesso Xros 4 pod kit is perfect if you’re after a simple device that allows you to adjust vapour production with ease. Featuring a built-in 1000mAh battery and fast charging, this kit will fully recharge in as little as 30 minutes. Plus, thanks to the two pods included, you can alternate between MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping as and when you like.
Features:
- Button & Inhale Activated
- Built-In 1000mAh Battery
- 16W Max Power Output
- For MTL & RDTL Vaping
- Three Power Levels
- Adjustable Airflow
- Compatible With All Xros Pods
- Lockable Power Button
The Xros 4 features a single-button design. To get started, click four times to unlock the device and then just inhale on the mouthpiece or hold the button down to start vaping. Click three times to select from low, medium or high power output levels and adjust the feel of each puff. Its handy LED screen will confirm your choice and also display the battery level. You’ll experience a discreet amount of vapour with the 0.8 Ohm MTL pod or an airier, RDTL vape with the 0.4 Ohm Corex pod. For extra peace of mind, the power button can be locked.
The Xros pods are top-filling and have a 2ml e-liquid capacity, just take the mouthpiece off to access the fill port. Each one comes with a built-in Corex mesh coil that’ll heat your vape juice quickly and evenly, improving the flavour of each puff. The device boasts an airflow control slide bar to adjust how tight or loose each draw feels. We recommend filling your Xros pods with 50% VG liquid. The 0.4 Ohm option can also be paired with 70% VG vape juice.
What Pods Can I Use WIth The Vaporesso Xros 4?
The Vaporesso Xros 4 is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 4 Device
- Either a 0.4 Ohm OR 0.6 Ohm Xros Corex Pod (Pre-Installed)
- 0.8 Ohm Xros Pod
- USB-C Charging Cable
- Reminder Card
- User Manual
How To Set Up & Use The Vaporesso Xros 4 Kit
Remove The Xros 4 Mouthpiece
Remove the black mouthpiece by clicking it away from you – the easiest way to do this is to hold the device in your hand and use your thumb to push the mouthpiece off.
Fill The Vaporesso Xros 4 Pod
Fill your pod by putting the nib of your e-liquid bottle into the red rubber lined port, ensuring you fill up the 2ml pod to the brim.
Reassemble Your Xros 4 Device
Once your pod has been refilled, replace the mouthpiece. You’ll hear a click when the mouthpiece has been securely attached.
Prime Your Xros 4 Coil
Leave your pod upright for ten minutes to “prime” your coil. This gives the coil time to soak up e-liquid, which helps it last longer and boosts flavour.
Vape Your Xros 4
Simply puff on the mouthpiece to vape. You can expect a smaller amount of vapour similar to a cigarette inhale.
Recharge Your Xros 4
Recharge your Xros 4 device using a USB-C cable.
The XROS 4 vape kit by Vaporesso uses 2ml refillable pods with built-in mesh coils. The Corex 2.0 construction of these pods will improve the flavour of each puff, heating e-liquid quickly and evenly.
A sliding airflow control bar on the back of the XROS 4 by Vaporesso allows you to adjust how tight or loose each draw feels, for MTL & RDTL vaping with ease.
The handy display screen and single button control of the XROS 4 vape kit lets you lock and unlock the device whilst offering three power outputs.
The Vaporesso XROS 4 vape kit features a powerful 1000mAh built-in battery that can be fully recharged in as little as 30 minutes, thanks to its fast charging capability.
Thanks to its aluminium alloy construction, the XROS 4 vape kit by Vaporesso is a sleek and sturdy device.
The Vaporesso XROS 4 vape kit is compatible with a wide range of XROS replacement pods including 0.4 Ohm, 0.6 Ohm, 0.8 Ohm, 1.0 Ohm and 1.2 Ohm versions, so there are plenty of options for MTL & RDTL vapers.
-
Vaporesso Xros 4 Nano Vape Kit
The Vaporesso Xros 4 Nano vape kit is an easy-to-use yet versatile option. An upgraded version of the Xros 3 Nano, and a smaller alternative to the Xros Pro, this pocket-friendly kit features a built-in 1350mAh battery that’s big enough to last most vapers all day. The 15 – 30W output range supports both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping, so it’s easy to switch up your inhale style. Two Xros pods and a bottle of Deliciu e-liquid are included, so you’ll have everything you need to get started!
Features:
- 1350mAh Built-In Battery
- MTL & RDTL Vaping
- 15-30W Output Range
- Button & Inhale Activated
- Adjustable Airflow
- 2ml Refillable Built-In Coil Pods
- Variable Wattage (With 0.4 Ohm Xros Pods)
- Eco, Normal & Power Modes (With All Other Xros Pods)
The Xros 4 Nano features a simple single-button design so it’s easy to use. Insert a pod, fill it up, and inhale on the mouthpiece or hold the button to vape. Normal Mode will automatically detect which pod you’ve inserted and output the best power level to match, but for more customisation you can also pick from battery-saving Eco Mode or flavour-boosting Power Mode. Plus, if you use an 0.4 Ohm Xros pod (available separately), you can fine-tune the wattage level for a tailored inhale.
The included Xros pods feature a top-filling design that makes refills easy – just remove the mouthpiece to access the fill port. The built-in coils inside Xros pods feature Corex mesh technology, so they’ll last longer and heat e-liquid more quickly for boosted flavour. The included 0.6 Ohm and 0.8 Ohm pods work best when filled with 50% VG e-liquid, and there are plenty of other resistance options to pick from, including 0.4 Ohm pods that can be paired with 70% VG blends.
What Pods Can I Use With The Vaporesso Xros 4 Nano?
The Vaporesso Xros 4 Nano can be used with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W), 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros 4 Nano Device
- Xros Corex 0.6 Ohm Pod
- Xros Corex 0.8 Ohm Pod
- USB-C Charging Cable
- User Manual & Warranty Card
- Lanyard
The Xros 4 Nano features a large built-in battery and full Xros pod compatibility.
Use Variable Wattage mode with the 0.4 Ohm Xros pod, and Eco, Normal and Power Modes with all other Xros pods.
-
Vaporesso XROS 4 Pod Kit
VAPORESSO XROS 4 POD KIT
Vaporesso’s XROS 4 pod kit features a compact and simple device that delivers amazing flavour with steady output. The XROS 4 welcomes the latest COREX 2.0 smart chipset, designed to offer three output modes for a triad of vaping experiences that you can personalise to suit your journey. Vaporesso has honed in on durability with the XROS 4 kit, which includes a powerful 1000mAh battery that enables quick 2A charging, fully recharging in just 30 minutes.
With the XROS 4 pod kit, vapers can enjoy a durable and reliable device that caters to a wide range of vaping preferences. The kit comes with two XROS Corex 2.0 Pod options, the 0.6Ω and 0.8Ω pods, utilising their COREX 2.0 technology to optimise either nic salt or freebase e-liquids. Along with its adjustable airflow slider, the XROS 4 pod kit accommodates both mouth-to-lung (MTL) and restricted-direct-to-lung (RDL) vaping styles.
Key Features
One of the standout features of the Xros 4 pod is its combination of automatic functions and customisable settings. For those who prefer a hassle-free vaping experience, the device offers a range of preset modes that self-regulate or allow vapers to fine-tune their vaping journey.
- Included 0.6Ω XROS 2ml top-filling pod
- Three output adjustment modes
- Pulse mode power boosting
- COREX 2.0 aroma reproduction
- 1000 mAh battery fully charged in just 30 minutes
- Compatibility with XROS COREX 2.0 & 3.0 technology
Design
Among Vaporesso’s immense range of pod kits, the XROS 4 series, including the XROS 4 Mini, stands out with its purely aluminium unibody chassis built for the superior feel and seamless fit within the avid vaper’s lifestyle. Its material structure boasts a comfortable grip and is designed for wear-and-tear resistance, making it a pleasure to hold and use.
Battery
The XROS 4 Nano boasts the largest XROS battery so far: a whopping 1350 mAh high-density battery that provides four days of use from one quick charge!
Battery
The XROS 4 pod kit showcases Vaporesso’s commitment to reducing charging time between your vaping bliss. With a 1000 mAh battery, the XROS 4 device offers 2A rapid recharging, allowing for a full charge in just 30 minutes.
Adjustable Airflow
The XROS 4 provides vapers with the flexibility to easily switch between mouth-to-lung (MTL) and restricted-direct-to-lung (RDL) vaping styles using its innovative adjustable airflow slider. This function allows users to customise their vaping experience, whether they prefer a rich taste or dense vapour.
Adjustment
When utilising the powerful 0.4Ω XROS Corex 2.0 pod, the XROS 4 Nano can be easily adjusted and controlled through ultra-precision power control in increments of 0.5w.
All other XROS pods operate in ECO, Normal, or Power modes and offer the same easy-to-adjust and control functionality.
Settings
The XROS Nano 4 features several settings, all easily adjusted through the click or clicks of a button. The 0.4Ω pod benefits from precision three-level wattage adjustment.
2 ClicksFor setting menu3 ClicksTo adjust the power/mode setting4 ClicksTo lock/unlock5 ClicksTo power on/off
COREX 2.0
The XROS 4 does include the two 0.4Ω and 0.8Ω XROS Pod V2 options; however, it is compatible with the entire XROS Pod series. The 0.4Ω XROS Pod V2 boasts their incredible COREX 2.0 and SSS Leak-resistant technology, guaranteed to provide pure flavour replication without any mess or hassle. The COREX 2.0 heat-distributing mesh coil enhances the first generation by optimising temperature regulation, split-second ignition and an explosive taste. The built-in COREX cotton wick can efficiently saturate the coil to prevent a burnt taste and prolong your vaping bliss.
-
Vaporesso XROS 4 Nano Pod Kit
VAPORESSO XROS 4 NANO POD KIT
The Vaporesso XROS 4 Nano features the largest battery in the XROS family of pod vaping devices and is the first to include a 1.3″ full-colour TFT screen. The 1350 mAh battery can be quickly charged with 2A fast charging, providing up to four days of vaping without recharging. Added features include adjustable airflow, button operation and easy-to-use quick-click operation.
Vaporesso’s XROS 4 Nano includes 0.6Ω and 0.8Ω morph-mesh Corex 2.0 XROS pods, which provide rich, dense flavour and longer pod life. The XROS 4 Nano kit is fully compatible with the COREX 3.0 mesh refillable pods.
Key Features
- Circular 1.3″ full-colour TFT display screen
- COREX 2.0 Morph-Mesh technology
- 1350mAh long-lasting battery
- Full charge in 30 minutes
Colours
The XROS 4 Nano is a compact hand-held device in eight unique colours.
- Race Track
- Word-Pop Yellow
- Aquamarine
- Word-Pop Blue
- Twilight Purple
- Graphite Black
- Titanium Silver
- Kong
Battery
The XROS 4 Nano boasts the largest XROS battery so far: a whopping 1350 mAh high-density battery that provides four days of use from one quick charge!
Precision Airflow
A side-located airflow is easily adjusted, providing precision and effortless control of mouth-to-lung (MTL) to restricted-direct-to-lung (RDTL) vaping.
Display
Featuring a large 1.3″ TFT full-colour screen, the XROS 4 Nano delivers a big screen with enormous fun through the adjustability of three different themes.
Adjustment
When utilising the powerful 0.4Ω XROS Corex 2.0 pod, the XROS 4 Nano can be easily adjusted and controlled through ultra-precision power control in increments of 0.5w.
All other XROS pods operate in ECO, Normal, or Power modes and offer the same easy-to-adjust and control functionality.
