Best Seller Items
-
Vaporesso Vibe SE Vape Kit
The Vaporesso Vibe SE is a sleek and simple vape that’s ideal for anyone looking to bridge the gap between single-use devices and refillable pod kits. Although compact, it features a 1100mAh built-in battery that should last you a full day on one charge. Equipped with a dual mesh coil and two power modes, it delivers a familiar MTL (Mouth To Lung) inhale, just like a cigarette.
Features:
- 1100mAh Built-In Battery
- 0.6 Ohm & 0.8 Ohm Dual Mesh Coil
- MTL Vaping
- Inhale Activated
- Two Power Modes
- 2ml Side-Filling Pod
- 1A Charging Current
- USB-C Charging
To get started, fill your pod with e-liquid and insert it into the top of your device. Inhale on the mouthpiece to vape and it’ll produce smaller amounts of vapour, just like a cigarette, so it’s a great choice if you’re making the switch. It’s also ideal for those who prefer a lower level of vapour. To save battery, stick with ECO Mode, or opt for PWR Mode for a boost of flavour and more vapour production. When the time comes to recharge, plug in a USB-C cable.
The Vibe pod houses a 0.6 Ohm and 0.8 Ohm dual mesh coil. Thanks to the mesh design, it allows for more e-liquid to be heated at a faster rate to boost flavour and improve vapour production. As the coils are built-in, you can replace the whole pod with a new one once it starts to burn out. For best results, we’d recommend pairing this kit with a 50% VG e-liquid.
Please Note: This kit does not include a USB-C cable. If you don’t already own one, we’d recommend purchasing one separately.
Contains:
- Vaporesso Vibe SE Device
- Vibe Dual Mesh Coil Smart Pod
- Warranty Card
- User Manual
How To Set Up & Use The Vaporesso Vibe SE Vape Kit
Recharge Via USB-C
Charge your kit using a USB-C cable, this will take around an hour.
Remove Your Pod
Remove the pod from the kit and snap the mouthpiece off the pod.
Fill Your Pod
Insert the nib of your e-liquid bottle into the red fill port and top-up with 2ml of e-liquid.
Insert Pod
Insert your filled pod into the top of your device. The magnets will hold the pod in place.
Wait 10 Minutes
Wait up to 10 minutes for the e-liquid to soak into the coil. This is known as priming the coil to prevent dry hits.
Inhale To Vape
Inhale on the mouthpiece and this kit will produce a small amount of vapour.
The Vaporesso Vibe SE pod kit is powered by a built-in 1100mAh battery that can be recharged using a USB-C cable (sold separately).
Use Eco Mode to save your device’s battery, or go for PWR Mode to experience boosted flavour and better vapour production.
The Vaporesso Vibe SE pod kit is lightweight yet powerful device that’s ideal for beginner and expert vapers alike.
-
Vaporesso LUXE X COREX 2.0 Replacement Pods
VAPORESSO LUXE X COREX 2.0 PODS
Replacement pods featuring Vaporesso COREX 2.0 technology are only compatible with supported Vaporesso LUXE pod kits. Please check your device for compatibility before use.
Sold in packs of 2.
COREX 2.0
The latest Vaporesso COREX 2.0 technology features on the new upgraded LUXE COREX 2.0 pod cartridges, superseding the original Vaporesson LUXE X built-in coil pod. COREX 2.0 pods include upgraded Morph Mesh and COREX cotton, producing an explosive flavour with increased endurance.
Redesign
The Vaporesso LUXE X 0.6Ω and 0.8Ω pods have a thinner, narrower mouthpiece that is better suited to the shape of the mouth and perfect for tight-drawing mouth-to-lung (MTL) and restricted-direct-to-lung (RDTL) vaping.
The DTL 0.3Ω and 0.4Ω options continue the form of the original LUXE X pods with a wider mouthpiece for a freer, less-restricted draw.
Pod Styles
Vaporesso LUXE X pods are available in four resistances of built-in mesh coils, fillable at the base.
The 0.6Ω RDL and 0.8Ω MTL pods have a slimmer, narrower mouthpiece to replicate a tight-drawing inhalation.
Resistance and Vaping Style
0.3Ω MeshDTL0.4Ω Mesh (32W)DTL0.6Ω MeshRDL0.8Ω Mesh (16W)MTL
Specifications
LUXE X COREX 2.0 Pod
Capacity:2 ml (TPD)Coil:0.3Ω/0.4Ω/0.6Ω/0.8Ω Mesh built-inFilling:Bottom-fillingVaping StyleDTL/RDL/MTLDepending on what resistance of the pod, or pod type, the Vaporesso LUXE X replacement pods are recommended for use with High VG 70+ (DTL), 50/50 Freebase (MTL) and Nic Salt (MTL) E-Liquids.
Our guide on vaping styles explains the differences between mouth-to-lung (MTL) vaping and direct-to-lung (DTL) vaping.
To avoid premature coil failure, follow our coil priming guide.
-
Vaporesso Luxe X & XR Replacement Pod
Vaporesso Luxe X and Luxe XR replacement pods are designed for kits in the best-selling Luxe range, including the Luxe X, Luxe XR Max, Luxe X Pro and Luxe XR Max 2 vape kits. Take your pick from convenient pods with built-in coils, or go for the empty pods and pair them with your choice of Vaporesso GTX coil. With MTL (Mouth To Lung), RDTL (Restricted Direct To Lung) and DTL (Direct To Lung) options on offer, it’s easy to find your ideal level of vapour production.
Features:
- Vaporesso Luxe X & Luxe XR Replacement Pods
- Bottom-Fill Design
- MTL, RDTL & DTL Inhales
- Mesh Coil Build
- 0.3 Ohm – 0.8 Ohm Built-In Coil Resistances
- 0.2 Ohm – 1.2 Ohm Replaceable GTX Coil Resistances
Refilling your Luxe X or XR pod is easy – just remove the rubber stopper on the base to access the fill port. The versions of this pod that feature built-in coils reduce maintenance, as when the coil inside is finished you can simply swap out the entire pod. The empty pod options can be paired up with any GTX coil (sold separately), offering more resistances to choose from while being more budget-friendly and producing less waste.
Wondering which Luxe X pod to go for? For more information, see the Luxe X & Luxe XR pod compatibility guide below.
Luxe X And Luxe XR Pods Compatible Vape Kits
The Luxe X, Luxe X Pro, Luxe XR, Luxe XR Max, Luxe X2, Luxe XR Max 2 and Luxe X3 vape kits are compatible with the following built-in coil pods:
- 0.3 Ohm Mesh, 0.4 Ohm Mesh Luxe X pods, with 70% VG e-liquid
- 0.8 Ohm Mesh Luxe X pods, with 50% VG e-liquid
- 0.4 Ohm Ohm Corex 2.0, 0.6 Ohm Corex 2.0 and 0.8 Ohm Corex 2.0 Luxe X pods, with 50% VG e-liquid
They’re also compatible with the following replaceable coil pods:
- MTL Luxe XR pods, with 0.6 Ohm, 0.8 Ohm or 1.2 Ohm GTX coils and 50% VG e-liquid
- DTL Luxe XR pods, with 0.3 Ohm or 0.4 Ohm GTX coils and 70% VG e-liquid
Additionally, the Luxe XR Max and Luxe XR Max 2 only are also compatible with the following replaceable coil pods:
- DTL Luxe XR pods, with 0.15 Ohm or 0.2 Ohm GTX coils and 70% VG e-liquid
Contains:
- 2 x Vaporesso Luxe X Or XR Pods
-
Vaporesso Luxe Q Replacement Pods
The Vaporesso Luxe Q replacement pods will each hold up to 2ml of e-liquid and have been designed for use with the Vaporesso Luxe Q vape kit and the Vaporesso Luxe QS vape kit. These pods require little maintenance thanks to the built-in coil in each. There are four versions of the Luxe Q pods available, all of which use a mesh coil and are designed for MTL (Mouth To Lung) vaping.
Features
- Refillable 2ml Pods
- Built-In Mesh Coils
- Designed For MTL & RDTL Vaping
- SSS Leak-Resistant Technology
- Top-Filling
Featuring Vaporesso’s own “SSS” leak-resistant technology, they’re a more reliable option. These pods are also easy to refill thanks to the top-fill port which can be accessed by removing the mouthpiece. The 1.2 Ohm and 1.0 Ohm coils produce a small amount of vapour and better flavour thanks to the mesh build, while the 0.6 Ohm and 0.8 Ohm version produces more vapour.
Whichever pod you pick we recommend using a 50/50 or high PG e-liquid, with both nic salt and freebase nicotine e-liquid working well with these pods.
What Wattage Level Should I Use The Vaporesso Luxe Q Replacement Pod At?
- 0.6 Ohm – RDTL Vaping
- 0.8 Ohm – RDTL Vaping
- 1.0 Ohm – MTL Vaping
- 1.2 Ohm – MTL Vaping
-
Vaporesso Luxe X Dual Mesh Replacement Pods
VAPORESSO LUXE X DUAL MESH PODS
Replacement pods are for use with Vaporesso’s LUXE series pod & vape kits. Please check your device for compatibility before use.
These pods feature dual mesh coils to deliver peak flavour and aroma. Its leak-proof structure further extends the coil lifespan, prolonging your vaping bliss without compromising vaping quality.
Sold in packs of 2.
Dual Mesh Flavours
Pair your favourite nic salt or freebase e-liquid with the Luxe X3 for a deeper profile of your preferred tastes. The dual mesh technology guarantees a more full-bodied flavour journey, with a rich, satisfying pull with each puff.
Its advanced, reliable design further extends its lifespan, ensuring a longer-lasting, more consistent vaping experience.
Cleanly Refilled
The top of your included Luxe X Dual Mesh pod features the familiar top-filling design, ensuring a refilling experience as leak-free and clean as possible.
Specifications
Pod Capacity2mlResistance Options0.4Ω/ 0.6ΩRefill PortTop-filling designPack Size2 pods per pack -
Vaporesso LUXE X Dual Mesh Replacement Pod
Vaporesso LUXE X Dual Mesh Replacement Pod – Enhanced Flavour, Effortless Performance
The Vaporesso LUXE X Dual Mesh Replacement Pod is designed for vapers who demand consistent flavour, smooth airflow, and hassle-free performance from their device. Engineered specifically for the Vaporesso LUXE X3 Vape Kit and compatible LUXE X series devices, this replacement pod ensures your vape continues to perform at its best with minimal maintenance and maximum satisfaction.
Whether you’re replacing a worn pod or keeping spares on hand, the Vaporesso LUXE X pod delivers a refined vaping experience suitable for both beginners and experienced users alike.
Product Specification
Feature
DetailsBrand
VaporessoProduct Name
Vaporesso LUXE X Dual Mesh Replacement PodCompatible Devices
Vaporesso LUXE X Series / LUXE X3 Vape KitPod Capacity
2ml (TPD Compliant)Coil Type
Integrated Dual Mesh CoilVaping Style
MTL & RDL (Variant Dependent)E-Liquid Compatibility
Nicotine Salts & Freebase E-LiquidsRefill Method
Bottom Fill SystemMaterial
PCTG PlasticLeak Resistance
Enhanced Leak-Resistant DesignDesigned for the Vaporesso LUXE X Series
Built with Vaporesso’s attention to detail, it integrates seamlessly with the Vaporesso LUXE X3 Vape Kit, ensuring perfect compatibility and optimal performance. The precision-fit design eliminates leaks and guarantees stable airflow, so every puff feels smooth, controlled, and flavour-rich.
If you enjoy switching between flavours or vaping styles, having a dedicated replacement pod makes your experience cleaner and more convenient—no lingering taste, no mess, just fresh performance every time.
Advanced Dual Mesh Coil Technology for Superior Flavour
At the heart of the Vaporesso LUXE X Dual Mesh pod is advanced dual mesh coil technology, designed to enhance both flavour clarity and vapour consistency. The mesh structure heats e-liquid evenly, reducing dry hits while maximising taste delivery from the first draw to the last.
Key benefits of dual mesh coils include:
-
Faster and more even heating
-
Improved flavour intensity
-
Smoother vapour production
-
Longer coil lifespan compared to traditional coils
This makes the pod ideal for everyday vaping, especially for users who value clean flavour and dependable performance.
Optimised for MTL and RDL Vaping Styles
The Vaporesso LUXE X Dual Mesh Replacement Pod is perfect for both Mouth-To-Lung (MTL) and Restricted Direct Lung (RDL) vaping styles, depending on the pod resistance variant used. Whether you prefer a cigarette-like inhale with nicotine salts or a slightly airier draw with freebase e-liquids, this pod adapts effortlessly to your preference.
Its well-balanced airflow ensures a smooth draw without turbulence, making it an excellent choice for transitioning smokers or vapers looking for flexibility without complexity.
Leak-Resistant, User-Friendly Design
Nobody enjoys dealing with leaking pods. Vaporesso has addressed this with a leak-resistant pod structure, built using high-quality PCTG materials for durability and clarity. The transparent design allows you to monitor e-liquid levels at a glance, helping prevent dry hits and coil burnout.
Refilling is quick and simple, making this pod suitable for users of all experience levels. Just fill, click into place, and vape—no adjustments, no fuss.
Compatible with a Wide Range of E-Liquids
The Vaporesso LUXE X Dual Mesh Replacement Pod works exceptionally well with:
-
Nicotine salts for smooth throat hits and fast nicotine satisfaction
-
Freebase e-liquids for fuller vapour and bold flavour
This versatility makes it ideal for vapers who like to switch between different e-liquid types without changing devices.
Why Choose the Vaporesso LUXE X Dual Mesh Replacement Pod?
-
Designed for the Vaporesso LUXE X3 Vape Kit
-
Dual mesh coil for enhanced flavour and vapour
-
Suitable for MTL and RDL vaping styles
-
Leak-resistant and durable construction
-
Easy refill and maintenance-free design
-
Perfect for daily use or as a backup pod
Ideal for Everyday Vaping and Reliable Spares
Whether you’re replacing an old pod or stocking up for convenience, the Vaporesso LUXE X Dual Mesh Replacement Pod ensures your device continues to perform at its peak. It’s the ideal solution for maintaining flavour quality, vapour consistency, and overall vaping satisfaction.
Upgrade your vaping experience today with a genuine Vaporesso replacement pod—engineered for reliability, built for flavour, and trusted by vapers worldwide.
-
-
Vaporesso Luxe XR Max Kit (Single Pod Version)
The Vaporesso Luxe XR Pod Vape Kit is an incredibly adaptable and flexible pod vaping kit, catering for all three vaping styles with a vast choice of MTL, RDL and DTL coil options within the Vaporesso GTX coil series.
The Luxe XR packs a huge 2800 mAh built-in battery, powering Vaporesso’s AXON chip technology for a whole day of vaping with up to 80 watts of power, and is made easy to use with its large 0.54″ OLED screen. The kit is supplied with both a DTL and RDL pod, along with compatible DTL 0.2Ω Mesh and RDL 0.4Ω coils.
Specifications
Dimensions: 106.5 x 32.1 x 26 mm
POD Capacity: 2ml(TPD)
Compatible POD:
LUXE X 0.4Ω MESH POD
LUXE X 0.6Ω MESH POD
LUXE X 0.8Ω MESH POD
LUXE XR POD (DTL)
LUXE XR POD (MTL)
Battery Capacity: 2800mAh
Output Power: 80W MAX
Charging Current: DC 5V/2A,Type-C
Display: 0.54“ OLED Screen, 2 * RGB LED LightContents:
1 x VAPORESSO LUXE XR MAX Battery
1 x VAPORESSO LUXE XR POD (DTL)
1 x GTX 0.2Ω MESH COIL
1 x GTX 0.4Ω MESH COIL
1 x TYPE-C Cable
1 x User Manual & Warranty Card -
Vaporesso XROS 4 Mini Pod Kit
VAPORESSO XROS 4 MINI POD KIT
Vaporesso has expanded its XROS series to include the progressive XROS 4 Mini, a stylish and simple pod vape kit perfect for beginner vapers seeking robust and satisfying flavours. With a sleek, purely aluminium body, the XROS 4 Mini packs an incredible 1000 mAh battery, further assisted by super-fast USB Type-C charging. The XROS 4 Mini pod kit is ideal for newer vapers, as it eliminates toggle complexities with an auto-draw function, a simple airflow slider, and vibrant RGB lights that indicate its current power status.
Furthermore, Vaporesso designed the XROS 4 Mini with a pre-installed 0.6Ω XROS Pod, but the device also supports the XROS COREX 2.0 & COREX 3.0 platforms, catering to a wide range of vaping preferences. This version utilises their next-gen COREX 2.0 technology, fully optimised for either nic salt or freebase e-liquids. It delivers a fantastic mouth-to-lung (MTL) or restricted-direct-to-lung (RDL) experience.
Key Features
Vaporesso’s XROS 4 Mini pod kit features a range of convenient options designed to enhance your vaping experience.
- Included 0.4Ω XROS 2ml top-filling pod
- Precise airflow adjustments
- Compatibility with XROS Pod series
- COREX 2.0 aroma reproduction
- Immense 1000 mAh battery
Colours
With its portable and ergonomic body, Vaporesso fashioned the XROS 4 Mini pod kit to accompany you seamlessly throughout your day. In an enchanting range of 13 colourways, the XROS 4 Mini showcases a stylish kit perfect for on-the-go vaping.
- Black
- Space Grey
- Ice Blue
- Ice Green
- Ice Purple
- Ice Pink
- Champagne Gold
- Camo Silver
- Camo Red
- Camo Yellow
- Motor Race
- Pink City
- Word Po
Design
Among Vaporesso’s immense range of pod kits, the XROS 4 series, including the XROS 4 Mini, stands out with its purely aluminium unibody chassis built for the superior feel and seamless fit within the avid vaper’s lifestyle. Its material structure boasts a comfortable grip and is designed for wear-and-tear resistance, making it a pleasure to hold and use.
Battery
Despite its compact and stylish design, the XROS 4 Mini pod kit packs a powerful punch with its immense 1000 mAh battery, which provides uninterrupted hours of vaping. Vapers can experience longer periods of vaping bliss while on the move without the necessity of frequent recharging.
-
Vaporesso XROS 3 Mini Pod Kit
VAPORESSO XROS 3 MINI POD VAPE KIT
The Vaporesso XROS 3 Mini pod kit is a small, compact and discreet pod starter kit featuring a large 1000 mAh internal battery with an intelligent battery life indicator and offers various styles of vaping, from tight MTL to a looser RDTL inhale.
The XROS 3 Mini Pod kit includes a 0.6Ω XROS Original series pod cartridge, but is fully compatible with the XROS COREX 2.0 and XROS COREX 3.0 replacement pods for further utility. Choose your perfect vaping style through a wide range of premium-quality dual mesh refillable pods.
XROS Family
The XROS 3 Mini system allows vapers to use a straightforward MTL pod system, with the added flexibility of restricted direct-to-lung vaping through a more free and open inhale, achieved using the 0.6Ω pod option.
With a 1000 mAh high-density battery and COREX heating tech, the XROS 3 Mini pod system is the best within the XROS family of pod devices.
Flawless, rounded-edge design
The XROS 3 Mini pod kit features a mouthpiece shaped to be more flat and perfectly suited to fit the user, providing a more accurately tight MTL experience.
The sleek, slim design of the XROS 3 presents a premium and modern look, with comfortability delivered in the palm of your hand.
XROS 3 and XROS 3 Mini Pods
The XROS series of replacement pods already feature 0.8Ω and 1.2Ω MTL pod choices, with top-filling and Mesh coil features.
New to the series is a 1.0Ω addition to the tighter MTL experience and a 0.6Ω RDTL option, offering a more free inhale while still benefiting from the flavour production that the XROS is renowned for. XROS pods offer the assurance of a leak-proof experience with SSS Leak-Resistant technology.
Nic Salt and Free Base
All four XROS pod options are designed for use with both Freebase and Nic Salt e-liquids, with the 0.6Ω pod being designed to provide a sweeter experience with free base e-liquids.
High-density battery
The XROS 3 Mini might be mini by nature, but with a huge internal 1000 mAh high-density battery, the XROS mini delivers a consistent all-day vaping experience.
Oh. So. Powerful.
Don’t be fooled by the XROS’ size, as the innovative COREX heating technology applied with a unique morph-mesh coil structure ensures a more rapid and even heating system to vaporise your e-liquid to provide full flavour potential efficiently.
XROS pod technology provides higher liquid delivery through the use of fluffier cotton material, preventing a burnt taste from a shortage of e-liquid and extending the pod’s longevity by up to 50%.
-
Vaporesso Xros 5 Mini Vape Kit
The Vaporesso Xros 5 Mini vape kit is a compact vape that’s easy to use for new and experienced vapers alike. The built-in 1500mAh battery is big enough to last at least a full day on a single charge and it can be recharged in under an hour. The Vaporesso Xros pod included will produce a small amount of vapour to deliver an MTL (Mouth To Lung) inhale that feels like a more cigarette, and thanks to the range of compatible pod options this kit can also support RDTL (Restricted Direct To Lung) vaping.
Features:
- 1500mAh Built-In Battery
- MTL & RDTL Vaping
- Inhale Activated
- Adjustable Airflow
- 2ml Refillable Pod
- Built-In Corex 2.0 Mesh Coil
- USB-C 2A Fast Charging
Getting set up is simple – just fill the included pod and insert it into your device. The kit will automatically detect which pod you’ve chosen and output the best power level to match. For more customisation, you can adjust the airflow slider on the side of the device to experience a tighter or looser inhale. The LED indicator will let you know when your vape is low on battery. Plug it in with the included USB-C cable and it will recharge in less than an hour.
The Xros 5 Mini is compatible with all of the Xros Corex refillable pods. As each pod features a built-in coil, when it burns out you can just swap the pod out for a new one. The included 0.6 Ohm pod works best with 50% VG e-liquid. The 0.4 Ohm pod, sold separately, is best paired with 70% VG e-liquid.
What Pods Can I Use With The Vaporesso Xros 5 Mini?
The Vaporesso Xros 5 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W), 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 5 Mini Device
- 0.6 Ohm Xros Corex Pod
- USB-C Charging Cable
- User Manual
How To Set Up & Use The Vaporesso Xros 5 Mini Vape Kit
Charge Your Xros 5 Mini
With the included USB-C cable, you can recharge your Xros 5 Mini in less than an hour. The LED indicators on the front of the device will display your battery charge level.
Remove Your Xros 5 Mini Pod
Pull the pod out of the device.
Prepare Your Xros 5 Mini Pod
Peel the sticker from the base. Remove the mouthpiece.
Fill Your Xros Pod.
The fill port is marked with a red silicone ring. Fill the pod with vape juice.
Insert Your Xros 5 Mini Pod
Replace the mouthpiece and slide the pod into the device.
Prime Your Xros Pod
Wait ten minutes before you vape for your coil to “prime”, allowing e-liquid to fully soak into the cotton. This boosts flavour and makes your pod last longer.
Vape Your Xros 5
Press and hold the button or inhale on the mouthpiece to vape.
Adjust Your Airflow
Use the airflow slider on the side of the device to swap between a tighter or looser inhale.
The Vaporesso Xros 5 Mini is powered by a hefty 1500mAh battery that should last you at least a day before needing to be recharged.
Vaporesso Xros Corex 2.0 replacement pods feature built-in mesh coils. The wider surface area allows for more e-liquid to be heated for a boost of flavour and better vapour production.
The Xros 5 is compatible with the full range of Corex 2.0 replacement pods. For best results, we recommend using a 50% VG e-liquid with the included pods.
The Xros 5 Mini features Smart Mode that will automatically read the resistance of your chosen pod and selects the correct wattage to vape at.
Swap from a restricted MTL inhale to a loose RDTL inhale by adjusting the airflow slider on the side of the device.
-
Vaporesso Xros 3 Mini Vape Kit
The Vaporesso Xros 3 Mini vape kit is designed with simplicity in mind and is an ideal option for first time switchers. Its built-in 1000mAh battery is capable of supporting lengthy sessions of vaping. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which eliminates the need for messy coil changes thanks to featuring an integrated RDTL (Restricted Direct To Lung) coil.
Features:
- RDTL Vaping
- Built-In 1000mAh Battery
- Inhale Activated
- 2ml Refillable Pods
- Integrated Coils
With inhale activation technology, there are no buttons or menus to contend with. All you have to do is puff on the mouthpiece, which will create a moderate amount of vapour for an RDTL vape that has a tighter feeling draw. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour.
Xros pods feature a top-filling design and are easily refilled via the filling port located underneath the mouthpiece; you don’t even have to remove them from your device when refilling. The mesh build of the coils inside means the e-liquid heats up faster for better flavour. We recommend pairing this kit with 50% VG e-liquid or higher PG options.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
What Pods Can I Use With The Vaporesso Xros 3 Mini?
The Vaporesso Xros 3 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros 3 Mini Device
- 0.6 Ohm Vaporesso Xros Pod
- USB-C Charging Cable
- User Manual
How To Set Up And Use The Vaporesso Xros 3 Mini Kit
Remove The Xros 3 Mini Mouthpiece
Take the Xros pod out of your kit and remove the black mouthpiece by clicking it away from you – the easiest way to do this is to hold the device in your hand and use your thumb to push the mouthpiece off.
Fill The Vaporesso Xros 3 Mini Pod
Fill your pod by putting the nib of your e-liquid bottle into the hole ringed with red rubber.
Reassemble Your Xros 3 Mini Pod
Once your pod has been refilled, replace the mouthpiece. You’ll hear a click when the mouthpiece has been securely attached.
Prime Your Xros 3 Coil
Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid, which helps it last longer and boosts flavour.
Vape Your Xros 3 Mini
Inhale on the mouthpiece to vape. You’ll experience a small amount of vapour for an MTL inhale.
Charge Your Xros 3 Mini
We recommend charging your kit before you use it. Using the included USB-C cable, a full charge should take around an hour.
Thanks to its 1000mAh battery, the Vaporesso Xros 3 Mini can support long sessions of vaping in between charges.
The Vaporesso Xros pods are easily filled from the top and feature leak-resistant technology to cut down on mess.
The Vaporesso Xros 3 Mini vape kit boasts an eye-catching, innovative gradient design that’s aesthetically pleasing, so you can vape in style.
-
Vaporesso Xros 4 Mini Vape Kit
The Vaporesso Xros 4 Mini pod kit is perfect if you’re looking for a compact yet versatile device. Its sturdy aluminium design houses a 1000mAh built-in battery that’s big enough to last most vapers all day and with USB-C fast charging, it can be fully recharged in as little as 30 minutes. Thanks to its adjustable airflow and compatibility with the Xros pod range, you can swap between MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping with ease.
Features:
- Inhale Activated
- Built-In 1000mAh Battery
- 16W Max Power Output
- For MTL & RDTL Vaping
- Smart Mode
- Adjustable Airflow
- Compatible With All Xros Pods
To get started with the Xros 4 Mini, just insert your pod and Smart Mode will automatically recognise your coil and select the best power output. Fill your pod, then simply inhale on the mouthpiece to vape. Use the airflow slider to control how tight or loose each puff feels. A handy indicator light on the face of the device will help you keep track of your battery life so you know when it’s time to recharge.
To refill your Xros pod, remove the mouthpiece and top it up with 2ml of e-liquid. Xros pods include a built-in Corex mesh coil that’ll heat vape juice quickly and evenly to improve flavour. Within the Xros pod range, there are plenty of resistances between 0.4 Ohm and 1.2 Ohms to pick from, so it’s easy to find your perfect inhale. All Xros pods can be paired with 50% VG blends, while the lower resistance 0.4 Ohm pods can also be used with 70% VG e-liquid.
What Pods Can I Use With The Vaporesso Xros 4 Mini?
The Vaporesso Xros 4 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 4 Mini Device
- 0.6 Ohm Xros Corex Pod (Pre-Installed)
- USB-C Charging Cable
- Reminder Card
- User Manual
How To Set Up & Use The XROS 4 Mini Kit
Charge Your Device
Plug in the included USB-C charging cable into the port at the base of the kit to charge the device.
Prepare Pod For Filling
Remove the pod from the kit and remove the mouthpiece from the pod.
Fill Pod
Fill your pod, the fill port is marked with a red seal.
Replace Pod And Mouthpiece
Put the mouthpiece back on the pod and insert the pod back into the kit. Leave it to stand upright for a few minutes to let the liquid soak in.
Inhale To Vape
Smart Mode will automatically detect what pod you’re using, so just inhale on the mouthpiece to vape.
Adjust Airflow
You can switch between MTL and RDTL vaping by adjusting the airflow on the side of the device.
The Vaporesso Xros 4 Mini vape kit features an adjustable airflow, so you can effortlessly switch between a tight or loose inhale with a slider at the back.
Thanks to a handy LED indicator, you can easily keep track of how much battery life your Vaporesso Xros 4 Mini vape kit has left.
While compact, the Vaporesso Xros 4 Mini vape kit still manages to fit a built-in 1000mAh battery, which will last most vapers up to a day on a single full charge.
-
Vaporesso Xros Mini Pod Vape Kit
The Vaporesso Xros Mini pod kit is designed for easy, day-to-day vaping and is ideal for first time switchers too. The 1000mAh battery is able to support up to a day’s worth of vaping, even at its 16W max power. That means you’re less likely to get caught out with no battery. As well as the device itself, in your kit you’ll also find a 2ml refillable Xros pod with a built-in MTL (Mouth To Lung) coil. You don’t have to worry about messy coil changes, as the pod design means you can just replace the pod when needed.
Features:
- MTL Pod Kit
- Long-Lasting 1000mAh Battery
- Inhale Activated
- Fixed 11W / 16W Power Output
- 2ml Refillable Pods
- Built-In Coils
With no need for a complicated menu system, the Xros Mini detects which pod you’ve chosen and sets the wattage to either 16W or 11W accordingly. It makes your kit simpler to use, as you don’t have to figure out wattages or settings to vape. Whether the 1.2 Ohm, or the 0.8 Ohm pod (sold separately), is being used, you’ll experience full flavour and a discreet amount of vapour production for an MTL inhale.
The 2ml Xros pod is easily topped up via the filling port located underneath the mouthpiece. The 1.2 Ohm pod allows your kit to deliver a discreet inhale that’s closer to the feel of a cigarette. If you prefer an airier vape, Xros pods are available in a wide range of lower resistances that will produce increased levels of vapour. When it comes to e-liquid, you can take your pick from our massive selection of high PG and 50/50 vape juices.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
What Pods Can I Use WIth The Vaporesso Xros Mini?
The Vaporesso Xros Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros Mini
- 1.2 Ohm Xros Pod
- Type-C USB Cable
- User Manual
How To Set Up & Use My Vaporesso Xros Mini Kit
How To Charge Your Xros Mini Kit
Make sure your kit is fully charged before using it for the first time. You can use the USB cable included, with a full charge taking up to an hour from 0%.
Remove The Xros Pod Mouthpiece
To get your pod ready for filling, remove the black mouthpiece. You won’t need any tools, but if it’s a little stuck try putting the pod in your kit.
Fill Your Xros Pod
With the mouthpiece removed, you’ll be able to see two holes. Fill your pod via the hole with the black underlay – do not refill via the centre hole.
Reassemble Your Kit
Re-attach the mouthpiece to your pod. Again, if it’s tricky to put on, try inserting the pod into your kit first. Push down until you hear a click.
Prime Your Xros Coil
Stand your kit upright and leave it for ten minutes. This gives the e-liquid inside your pod time to soak into your coil, also known as ‘priming’ your coil.
Unlock & Vape Your Vaporesso XROS
Now that your coil is primed, click the kit’s button five times to unlock it. When unlocked, push the button again to vape.
The Vaporesso XROS Mini pod vape kit combines a small build with a simple design, making it the ideal choice for discreet vaping on the go.
Featuring a built-in 1000mAh battery, the XROS mini lasts longer between charges – supporting up to a full day of vaping.
The newly designed XROS pod comes as standard with this kit, featuring a 1.2 Ohm coil it creates a small amount of vapour for an MTL vape.
-
Vaporesso XROS Pro Pod Kit
VAPORESSO XROS PRO POD KIT
Vaporesso’s XROS Pro pod system is the ultimately refined pod vaping system. It features adjustable power of up to 30W, a substantial 1200 mAh battery capacity that can be fully charged in just 35 minutes, and a Super Pulse Mode that ensures a consistently powerful output.
The XROS Pro utilises the Vaporesso XROS Corex 2.0 pod series, but is fully compatible with the COREX 3.0 refillable pod. The kit includes 0.6Ω and 0.8Ω pods to deliver a smooth but intense restricted-direct-lung (RDL) flavour experience.
Combined with nicotine salt e-liquids, the adjustable airflow on the XROS Pro can be fully customised to every vaper and their preferences for nicotine ingestion.
Highlights
- Super Pulse mode
- Up to 30w precision power and airflow control
- 0.4Ω Top-filling pod
- Fire key lock button
- 2A 1200 mAh 35-minute full-charge battery
Overview
Vaporesso’s XROS Pro is the first pod system to feature a 0.4Ω pod with adjustable power up to 30w in the XROS Series, offering a restricted-direct-lung (RDL) pod vaping experience.
Crossing the limits to the pro experience of excellent flavour production, XROS Pro features AXON Super Pulse mode and COREX Heating Tech. The refined operation, display and button control ensure a stress-free experience with easy top-fill pods, a large 1200 mAh battery, and ultra-convenient XROS pod choices in five different resistances for multiple mouth-to-lung (MTL) vaping experiences.
Battery
The XROS Pro features Vaporesso’s biggest-ever XROS battery capacity, boasting 1200 mAh, a 200 mAh increase on its predecessor. 2A rapid charging capabilities see a 50% decrease in the time spent charging the device.
Style
Choose from nine different colours of XROS Pro pod systems, all with individual styles and looks.
- Black
- Silver
- Blue
- Red
- Green
- Orange
- Pink
- Purple
- Champagne Gold
Display
The XROS Pro is Vaporesso’s first XROS pod system with a display screen, that intuitively shows your wattage level, puff count and battery level when using the 0.4Ω XROS Pod.
The remaining four XROS pod options with differing resistances will display ECO/Normal/Power mode instead of wattage level.
Adjustment
The XROS Pro can be customised for flavour through ultra-precision power control. Adjust your wattage using three clicks of the fire button in 0.5w increments with the 0.4Ω XROS pod.
Slide and adjust the airflow with precision.
Operation
With one single button, the Vaporesso XROS Pro is easy to operate, and different operations can be performed by clicking the fire button.
2 Clicks:RGB Light3 Clicks:Wattage adjustment and Mode selection4 Clicks:Clear puff counter
Slide-lock
An industry first sees Vaporesso implement a slide-lock button allowing you to lock the fire button by sliding the side button upward and unlock it by sliding it downward. This simple feature prevents vapers from accidentally firing the device through the switch but still allows for auto-draw activation, even when the lock is engaged.
Activation
The XROS Pro can deliver a superior flavour through button or draw activation, depending on your preference.
Enhance
Vaporesso’s XROS 0.4Ω with COREX technology delivers denser clouds with a smoother taste and pronounced throat hit. Accurate flavour is consistently delivered through COREX Heating Tech with a longer lifespan.
The XROS Pro pod system pioneers the application of Super Pulse mode, once exclusive to a tank mod but now debuting in their pod system. This special mode ensures a consistently powerful output better than ever, from full to low battery levels.
XROS Pods
The XROS Corex 2.0 series of replacement pods already features 0.8Ω and 1.2Ω MTL pod choices, easy top-filling, anti-leaking, and mesh coil features.
In addition to these, the series offers a 1.0Ω for a tighter MTL vape, along with a 0.6Ω RDTL option, delivering a more free inhale while still benefiting from the flavour production that the XROS is known for, and a new powerful 0.4Ω DTL pod for a full direct-to-lung (DTL) experience.
Resistance and Power
The XROS series of pods offers five different top-filling pod choices, which are compatible across the XROS range of vaping devices.
Due to its higher power constraints, the 0.4Ω XROS pod option is only compatible with the XROS Pro, XROS 4 and XROS 4 Mini pod vape kits.
0.4ΩBest 25w (only compatible with XROS PRO, XROS 4 and XROS 4 Mini)0.6ΩBest: 21w0.8ΩBest: 16w1.0ΩBest: 12w1.2ΩBest: 10w
-
Vaporesso Xros Pro Vape Kit
The Vaporesso Xros Pro pod kit is an ideal option if you want a vape that’s full of features yet still easy to use. Housing a 1200mAh battery (that can be recharged in 35 minutes) in its sturdy, compact body, it’s capable of delivering a 5-30W output that’s ideal for MTL (Mouth To Lung), RDTL (Restricted Direct To Lung) and DTL (Direct To Lung) vaping. This, along with a range of built-in coil pods, makes the Xros Pro easy to tailor. Each kit includes two pods, so you’ll have everything you need to get started.
Features:
- 1200mAh Built-In Battery
- Inhale & Button Activated
- MTL, RDTL & DTL Vaping Styles
- 5-30W Output Range
- Smart & Variable Wattage Modes
- Adjustable Airflow
- 2ml Top-Filling Pods
- 0.4 Ohm – 1.2 Ohm Xros Pod Resistances
Setting up your Xros Pro is easy. Equipped with Smart mode, it recognises whichever coil is in your pod and will output the best wattage for it, for a no-fuss vape. Pair your kit with the included Xros pods and swap between longer battery life (Eco Mode), a balanced vape (Normal Mode) or the strongest vape possible (Power Mode). Or, if you’re looking for a little customisation, the 0.4 Ohm Xros pod which is available separately allows you to finetune the wattage output for your perfect inhale.
Xros pods feature a handy top-fill design that means you don’t even need to remove them from the device to top them up. Just lift off the mouthpiece to reveal the filling port. The built-in coil design means maintenance is simple – once the flavour begins to fade or you notice a burnt taste, simply replace the whole pod. Furthermore, the mesh design of the coils heats your e-liquid faster, boosting its flavour. Speaking of e-liquid, Xros pods will work best with 50/50 and high PG vape juice – the 0.4 Pro pod can also be used with 70% VG e-liquid.
Read our Vaporesso Xros Pro vape kit review for even more information and expert opinions to find out whether this vape is right for you.
What Pods Can I Use WIth The Vaporesso Xros Pro?
The Vaporesso Xros Pro is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros Pro Vape Device
- 1 x Vaporesso Xros 0.6 Ohm Pod
- 1 x Vaporesso Xros 0.8 Ohm Pod
- USB-C Charging Cable
- User Manual
How To Set Up And Use The Xros Pro Kit
Charge Your Xros Pro Kit
Using the included USB-C cable, you can fully charge your Xros Pro in about 35 minutes. The screen will display your charge level as well as how much charging time is left.
Prepare Your Xros Pro Pod
Take the pod out of the kit and remove the protective film from the base.
Fill Your Xros Pro Pod
Snap off the mouthpiece to access the fill port, marked with a red silicone ring. Fill the pod up with your e-liquid.
Prime Your Xros Pro Pod
Insert your pod into the device and wait ten minutes before you vape for your coil to “prime” – allowing e-liquid to fully soak into the cotton, improving flavour and coil longevity.
Switch Your Xros Pro On
Press the main button 5 times to turn on your vape kit.
Vape Your Xros Pro
You’re ready to start vaping! Inhale on the mouthpiece or press and hold the power button to vape.
Adjust The Power Level On The Xros Pro
Your device will automatically select the best power level for your chosen pod. You can also press the power button three times to swap between Eco, Normal and Power mode or unlock wattage controls (for the 0.4 Ohm pod).
The Xros Pro’s adjustable airflow and power control allow for a customisable vape.
The 0.4 Ohm pod supports Variable Wattage, while other pods support a variety of vaping modes.
Single button operation means the Xros Pro is easy to use, despite being full of features.
For extra peace of mind, you can lock the Xros Pro’s fire button using the slider.
Thanks to USB-C charging, the Xros Pro recharges quickly. Plus, it boasts a bigger battery capacity than previous Xros models.
-
Vaporesso XROS Pro 2 Pod Kit
VAPORESSO XROS PRO 2 POD KIT
Vaporesso’s XROS Pro 2 pod kit combines sleek portability with powerful performance, delivering rich, consistent flavour in every puff. The XROS Pro 2 debuts Vaporesso’s cutting-edge COREX 3.0 mesh technology, engineered to maximise flavour accuracy, boost coil longevity, and enhance vapour production for a superior vaping experience. Built with endurance in mind, the XROS Pro 2 features a massive 2000 mAh battery that supports rapid recharging in under 30 minutes, keeping you powered for up to two consecutive days of vaping.
The XROS Pro 2 Kit comes equipped with both 0.4Ω and 0.6Ω COREX 3.0 Mesh XROS 2ml pods, complete with the latest COREX 3.0 technology. Fully compatible with the entire XROS pod series, it ensures flexibility across a wide range of preferences. Whether you enjoy smooth mouth-to-lung (MTL) draws or a more open restricted-direct-to-lung (RDL) experience, the XROS Pro 2 has you covered.
Key Features
- Mega 2000 mAh battery.
- Recharged to full in under 30 minutes.
- Aerospace-grade alloy weighing only 65g.
- Enhanced flavour boost.
- Reliable accident-proof lock.
- COREX 3.0 premium-quality mesh technology.
Prolong your Vaping Bliss
The XROS Pro 2 houses a massive 2000 mAh battery that eliminates any concerns about running out of power during the day. Built for endurance, it can keep you vaping comfortably for up to two consecutive days on a single charge. When it’s time to recharge, the device supports rapid charging, powering back to full in just under 30 minutes for unbeatable convenience.
For Vapers On-the-Go
The XROS Pro 2 Kit is designed to be ultra-lightweight, making it the ideal choice for vaping on the move. Built from aerospace-grade aluminium alloy, it combines durability with a sleek, premium feel. This advanced construction ensures long-lasting reliability while maintaining the device’s effortless portability.
Easy Navigation
The XROS Pro 2 is equipped with a vibrant 0.96-inch colour TFT screen that delivers your vaping data with crystal-clear accuracy and detail. With one-button simplicity, you can easily navigate settings and monitor everything from wattage to puff count at a glance.
Precise and Seamless
The XROS Pro 2 Pod Kit delivers seamless, stepless control for a truly personalised vaping experience. Its precise airflow slider lets you fine-tune airflow with pinpoint accuracy, while the intuitive wattage dial allows effortless adjustments in ultra-precise 0.5W increments, displayed to the decimal.
Corex 3.0 Pod Series
The XROS Pro 2 kit includes the 0.4Ω and 0.8Ω XROS Pod V2 options, while remaining fully compatible with the entire XROS Pod series. These XROS V2 pods feature the advanced COREX 3.0 and SSS Leak-resistant technology, delivering exceptional flavour accuracy with zero mess or hassle.
Pod and Wattage
0.4ΩBest 25w (only compatible with XROS PRO, XROS 4, XROS 5, XROS 4 and 5 Mini)0.6Ω21W0.8Ω16W1.0Ω12W1.2Ω10W
Deluxe Coil Tech
The upgraded COREX 3.0 heat-distributing mesh coil takes performance beyond previous generations by further enhancing temperature precision, ultra-fast ignition, and an even more intense taste experience. Its refined COREX cotton wick provides faster, more efficient saturation to prevent burning and extend the lifespan of your vaping enjoyment.
All COREX 3.0 pod options retain the convenient top-filling system, enabling you to refill your e-liquid easily without needing to remove the pod.
Specifications
Size125.7 x 25.7 x 18.4mmPod Capacity2ml (TPD)Coil Resistance0.4Ω/0.6ΩBattery2000 mAhOutput Power30WChargingUSB Type-C 5V/2ADisplay0.96-inch TFT Screen
What’s in the box?
- 1 x XROS Pro 2 battery device
- 1 x 0.4Ω Corex 3.0 Mesh XROS 2ml Pod cartridge (Pre-installed)
- 1 x 0.6Ω Corex 3.0 Mesh XROS 2ml Pod cartridge (Inside the box)
- 1 x Type-C Cable
- 1 x Reminder Card
- 1 x User Manual & Warranty Card
Depending on how many cigarettes you smoke, we recommend the following strength e-liquids with the Vaporesso XROS Pro 2 pod kit.
-
Vaporesso XROS PRO 2 Vape Kit
The Vaporesso XROS PRO 2 Vape Kit is a versatile and powerful pod system designed for vapers of all experience levels, offering a range of vaping styles from mouth-to-lung (MTL) to restricted direct-lung (RDTL) and direct-lung (DTL). It is an upgrade to the XROS PRO, featuring enhanced battery capacity and advanced pod technology.
Key Features:
-
Battery: Built-in 2000mAh battery with fast USB Type-C charging, fully charging in about 1 hour.
-
Power Output: Adjustable wattage from 5W to 30W, allowing precise control in 0.5W increments.
-
Pods: Comes with two XROS Corex 3.0 mesh pods included—
-
0.4Ω pod for high VG e-liquids, suitable for DTL or RDTL vaping (optimal around 25W)
-
0.6Ω pod for 50/50 VG/PG or salt nicotine liquids, ideal for MTL vaping (optimal around 21W)
-
-
Airflow: Adjustable airflow slider on the side lets users customize draw tightness from tight MTL to looser RDTL style.
-
Display & Modes: Features a smart OLED screen displaying wattage, puff count, battery level, coil resistance, and vaping mode. Modes include Smart, Eco (power saving), and Super Pulse (consistent performance when battery is low).
-
Activation: Choose between inhale activation or button firing for user preference.
-
Refill: Top-fill design with 2ml e-liquid capacity in each pod, leak-resistant.
-
Compatibility: Supports all XROS pods across the Corex mesh coil range (0.4Ω to 1.2Ω), offering vast flexibility in vaping styles and liquids.
-
Design: Lightweight, ergonomic design for comfortable handling.
Why Choose Vaporesso XROS PRO 2?
-
Extended battery life (2000mAh) supports longer, uninterrupted vaping sessions.
-
Highly customizable thanks to adjustable wattage, airflow, and firing modes.
-
Dual pod system caters to a broad range of vaping preferences (MTL to DTL).
-
Advanced mesh coil technology enhances flavor and vapor production.
-
Clear display and intuitive controls simplify device management for all users.
-
-
Vaporesso XROS 4 Mini Pod Kit
Vaporesso has expanded its XROS series to include the progressive XROS 4 Mini, a stylish and simple pod vape kit perfect for beginner vapers seeking robust and satisfying flavours. With a sleek, purely aluminium body, the XROS 4 Mini packs an incredible 1000 mAh battery, further assisted by super-fast USB Type-C charging. The XROS 4 Mini pod kit is ideal for newer vapers, as it eliminates toggle complexities with an auto-draw function, a simple airflow slider, and vibrant RGB lights that indicate its current power status.
Furthermore, Vaporesso designed the XROS 4 Mini with a pre-installed 0.6Ω XROS Pod, but the device also supports the XROS COREX 2.0 & COREX 3.0 platforms, catering to a wide range of vaping preferences. This version utilises their next-gen COREX 2.0 technology, fully optimised for either nic salt or freebase e-liquids. It delivers a fantastic mouth-to-lung (MTL) or restricted-direct-to-lung (RDL) experience.
Key Features
Vaporesso’s XROS 4 Mini pod kit features a range of convenient options designed to enhance your vaping experience.
- Included 0.4Ω XROS 2ml top-filling pod
- Precise airflow adjustments
- Compatibility with XROS Pod series
- COREX 2.0 aroma reproduction
- Immense 1000 mAh battery
Colours
With its portable and ergonomic body, Vaporesso fashioned the XROS 4 Mini pod kit to accompany you seamlessly throughout your day. In an enchanting range of 13 colourways, the XROS 4 Mini showcases a stylish kit perfect for on-the-go vaping.
- Black
- Space Grey
- Ice Blue
- Ice Green
- Ice Purple
- Ice Pink
- Champagne Gold
- Camo Silver
- Camo Red
- Camo Yellow
- Motor Race
- Pink City
- Word Po
Design
Among Vaporesso’s immense range of pod kits, the XROS 4 series, including the XROS 4 Mini, stands out with its purely aluminium unibody chassis built for the superior feel and seamless fit within the avid vaper’s lifestyle. Its material structure boasts a comfortable grip and is designed for wear-and-tear resistance, making it a pleasure to hold and use.
Battery
Despite its compact and stylish design, the XROS 4 Mini pod kit packs a powerful punch with its immense 1000 mAh battery, which provides uninterrupted hours of vaping. Vapers can experience longer periods of vaping bliss while on the move without the necessity of frequent recharging.
Interactions
The XROS 4 Mini pod kit features a dynamic RGB display that provides instant updates on the battery level and power status. Each LED light represents a different battery state, ensuring you are always aware of when to recharge before your next adventure.
Battery Indication
Red Light0 – 30%Blue Light30% – 70%Green Light70% – 100%
Adjustable Airflow
The XROS 4 is designed to offer users the freedom to switch between mouth-to-lung (MTL) and restricted-direct-to-lung (RDL) vaping styles effortlessly. It features an innovative adjustable airflow slider that enables vapers to customise their vaping experience based on their preference for a richer taste or denser vapour.
Mighty with Each Puff
The XROS 4 pod system integrates Vaporesso’s remarkable AXON smart chipset, continuously improving your power output and introducing a whole new spectrum of flavours for your taste buds to savour and explore.
XROS Pod Compatibility
The XROS 4 Mini pod vape kit ensures seamless compatibility across the entire XROS Corex 2.0 pod series, featuring cutting-edge innovations like the COREX 2.0 built-in coil technology and SSS anti-leak design. With every puff, you can enjoy a burst of rich flavour since the split-second ignition ensures a satisfying vaping experience. The leak-proof transparent e-liquid chamber allows users to easily monitor their e-liquid levels, making it a convenient and reliable option for vapers of all levels.
Introducing COREX 2.0 Technology
One of the standout features of the 0.4Ω XROS Pod V2 is its ingenious COREX 2.0 heat-distributing mesh coil, which vastly improves the first generation’s vapour production, flavour recreation, and overall lifespan. The COREX 2.0 mesh coil is specifically engineered to enhance the flavour profile of your e-liquid by providing even temperature control, instant ignition and an amazing aroma, resulting in a consistent and smooth vaping experience.
Easily Refilled
The XROS Pod V2 incorporates their state-of-the-art SSS Leak-Resistant Technology, guaranteeing a hassle-free vaping experience from start to finish. This feature effectively prevents any messy leakage from occurring internally, ensuring a clean experience throughout its lifespan. Its top-filling port ensures a seamless refilling process for your convenience.
-
Vaporesso XROS 4 Nano Pod Kit
VAPORESSO XROS 4 NANO POD KIT
The Vaporesso XROS 4 Nano features the largest battery in the XROS family of pod vaping devices and is the first to include a 1.3″ full-colour TFT screen. The 1350 mAh battery can be quickly charged with 2A fast charging, providing up to four days of vaping without recharging. Added features include adjustable airflow, button operation and easy-to-use quick-click operation.
Vaporesso’s XROS 4 Nano includes 0.6Ω and 0.8Ω morph-mesh Corex 2.0 XROS pods, which provide rich, dense flavour and longer pod life. The XROS 4 Nano kit is fully compatible with the COREX 3.0 mesh refillable pods.
Key Features
- Circular 1.3″ full-colour TFT display screen
- COREX 2.0 Morph-Mesh technology
- 1350mAh long-lasting battery
- Full charge in 30 minutes
Colours
The XROS 4 Nano is a compact hand-held device in eight unique colours.
- Race Track
- Word-Pop Yellow
- Aquamarine
- Word-Pop Blue
- Twilight Purple
- Graphite Black
- Titanium Silver
- Kong
Battery
The XROS 4 Nano boasts the largest XROS battery so far: a whopping 1350 mAh high-density battery that provides four days of use from one quick charge!
Precision Airflow
A side-located airflow is easily adjusted, providing precision and effortless control of mouth-to-lung (MTL) to restricted-direct-to-lung (RDTL) vaping.
Display
Featuring a large 1.3″ TFT full-colour screen, the XROS 4 Nano delivers a big screen with enormous fun through the adjustability of three different themes.
Adjustment
When utilising the powerful 0.4Ω XROS Corex 2.0 pod, the XROS 4 Nano can be easily adjusted and controlled through ultra-precision power control in increments of 0.5w.
All other XROS pods operate in ECO, Normal, or Power modes and offer the same easy-to-adjust and control functionality.
-
Vaporesso XROS 4 Pod Kit
VAPORESSO XROS 4 POD KIT
Vaporesso’s XROS 4 pod kit features a compact and simple device that delivers amazing flavour with steady output. The XROS 4 welcomes the latest COREX 2.0 smart chipset, designed to offer three output modes for a triad of vaping experiences that you can personalise to suit your journey. Vaporesso has honed in on durability with the XROS 4 kit, which includes a powerful 1000mAh battery that enables quick 2A charging, fully recharging in just 30 minutes.
With the XROS 4 pod kit, vapers can enjoy a durable and reliable device that caters to a wide range of vaping preferences. The kit comes with two XROS Corex 2.0 Pod options, the 0.6Ω and 0.8Ω pods, utilising their COREX 2.0 technology to optimise either nic salt or freebase e-liquids. Along with its adjustable airflow slider, the XROS 4 pod kit accommodates both mouth-to-lung (MTL) and restricted-direct-to-lung (RDL) vaping styles.
Key Features
One of the standout features of the Xros 4 pod is its combination of automatic functions and customisable settings. For those who prefer a hassle-free vaping experience, the device offers a range of preset modes that self-regulate or allow vapers to fine-tune their vaping journey.
- Included 0.6Ω XROS 2ml top-filling pod
- Three output adjustment modes
- Pulse mode power boosting
- COREX 2.0 aroma reproduction
- 1000 mAh battery fully charged in just 30 minutes
- Compatibility with XROS COREX 2.0 & 3.0 technology
Design
Among Vaporesso’s immense range of pod kits, the XROS 4 series, including the XROS 4 Mini, stands out with its purely aluminium unibody chassis built for the superior feel and seamless fit within the avid vaper’s lifestyle. Its material structure boasts a comfortable grip and is designed for wear-and-tear resistance, making it a pleasure to hold and use.
Battery
The XROS 4 Nano boasts the largest XROS battery so far: a whopping 1350 mAh high-density battery that provides four days of use from one quick charge!
Battery
The XROS 4 pod kit showcases Vaporesso’s commitment to reducing charging time between your vaping bliss. With a 1000 mAh battery, the XROS 4 device offers 2A rapid recharging, allowing for a full charge in just 30 minutes.
Adjustable Airflow
The XROS 4 provides vapers with the flexibility to easily switch between mouth-to-lung (MTL) and restricted-direct-to-lung (RDL) vaping styles using its innovative adjustable airflow slider. This function allows users to customise their vaping experience, whether they prefer a rich taste or dense vapour.
Adjustment
When utilising the powerful 0.4Ω XROS Corex 2.0 pod, the XROS 4 Nano can be easily adjusted and controlled through ultra-precision power control in increments of 0.5w.
All other XROS pods operate in ECO, Normal, or Power modes and offer the same easy-to-adjust and control functionality.
Settings
The XROS Nano 4 features several settings, all easily adjusted through the click or clicks of a button. The 0.4Ω pod benefits from precision three-level wattage adjustment.
2 ClicksFor setting menu3 ClicksTo adjust the power/mode setting4 ClicksTo lock/unlock5 ClicksTo power on/off
COREX 2.0
The XROS 4 does include the two 0.4Ω and 0.8Ω XROS Pod V2 options; however, it is compatible with the entire XROS Pod series. The 0.4Ω XROS Pod V2 boasts their incredible COREX 2.0 and SSS Leak-resistant technology, guaranteed to provide pure flavour replication without any mess or hassle. The COREX 2.0 heat-distributing mesh coil enhances the first generation by optimising temperature regulation, split-second ignition and an explosive taste. The built-in COREX cotton wick can efficiently saturate the coil to prevent a burnt taste and prolong your vaping bliss.
-
Vaporesso Xros 4 Nano Vape Kit
The Vaporesso Xros 4 Nano vape kit is an easy-to-use yet versatile option. An upgraded version of the Xros 3 Nano, and a smaller alternative to the Xros Pro, this pocket-friendly kit features a built-in 1350mAh battery that’s big enough to last most vapers all day. The 15 – 30W output range supports both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping, so it’s easy to switch up your inhale style. Two Xros pods and a bottle of Deliciu e-liquid are included, so you’ll have everything you need to get started!
Features:
- 1350mAh Built-In Battery
- MTL & RDTL Vaping
- 15-30W Output Range
- Button & Inhale Activated
- Adjustable Airflow
- 2ml Refillable Built-In Coil Pods
- Variable Wattage (With 0.4 Ohm Xros Pods)
- Eco, Normal & Power Modes (With All Other Xros Pods)
The Xros 4 Nano features a simple single-button design so it’s easy to use. Insert a pod, fill it up, and inhale on the mouthpiece or hold the button to vape. Normal Mode will automatically detect which pod you’ve inserted and output the best power level to match, but for more customisation you can also pick from battery-saving Eco Mode or flavour-boosting Power Mode. Plus, if you use an 0.4 Ohm Xros pod (available separately), you can fine-tune the wattage level for a tailored inhale.
The included Xros pods feature a top-filling design that makes refills easy – just remove the mouthpiece to access the fill port. The built-in coils inside Xros pods feature Corex mesh technology, so they’ll last longer and heat e-liquid more quickly for boosted flavour. The included 0.6 Ohm and 0.8 Ohm pods work best when filled with 50% VG e-liquid, and there are plenty of other resistance options to pick from, including 0.4 Ohm pods that can be paired with 70% VG blends.
What Pods Can I Use With The Vaporesso Xros 4 Nano?
The Vaporesso Xros 4 Nano can be used with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W), 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros 4 Nano Device
- Xros Corex 0.6 Ohm Pod
- Xros Corex 0.8 Ohm Pod
- USB-C Charging Cable
- User Manual & Warranty Card
- Lanyard
The Xros 4 Nano features a large built-in battery and full Xros pod compatibility.
Use Variable Wattage mode with the 0.4 Ohm Xros pod, and Eco, Normal and Power Modes with all other Xros pods.
-
Vaporesso Xros Pro 2 Vape Kit
The Vaporesso Xros Pro 2 vape kit is a lightweight option with a straightforward design, alongside easy-to-use features that make it simple to use even if you’ve never vaped before. An upgrade to the Xros Pro, it’s powered by a larger 2000mAh built-in battery that can be recharged in just over an hour’s time. With a 5-30W adjustable output that supports all Xros Corex pods, it can be used for MTL (Mouth To Lung), RDTL (Restricted Direct To Lung) and DTL (Direct To Lung) vaping. Each kit includes two Xros Corex 3.0 pods, so you’ll have everything you need to get started, just add e-liquid.
Features:
- 2000mAh Built-In Battery (Charges In 75 Minutes)
- 5-30W Wattage Range
- MTL, RDTL & DTL Vaping
- Inhale & Button Activation
- Adjustable Airflow
- Multiple Modes (Smart, Eco, Power)
- Compatible With All Xros Series Pods
- Top-Filling Design
- 2ml E-Liquid Capacity
- Built-In Corex 3.0 Mesh Coils (For Improved Flavour)
- Compatible With 50/50 & High VG E-Liquids
Getting started with your Xros Pro 2 is quick and easy thanks to its single-button design. With a few button presses, you can swap between Eco Mode, Normal Mode and Power Mode and change how much vapour your kit creates. Using the 0.4 Ohm Xros pod only, you can adjust the wattage output more precisely. If you’re looking for even more customisation, you can use the airflow slider to change how tight or loose each inhale feels. For extra peace of mind, you can also lock the button.
Vaporesso Xros 3.0 replacement pods contain built-in Corex mesh coils that’ll help improve the taste of your vape, as they can heat more e-liquid at a faster rate. Once the coils have finished and the flavour starts to fade, you can replace each pod with a new one. To make the most out of these pods, use a 50% VG e-liquid with the 0.6 Ohm RDTL pod, and a 70% VG e-liquid with the 0.4 Ohm DTL pod.
Still can’t decide? Have a read of our Xros Pro 2 vape kit review and learn everything you’ll need to know about this kit.
What Pods Can I Use WIth The Vaporesso Xros Pro 2?
The Vaporesso Xros Pro 2 is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros Pro 2 Device
- 0.4 Ohm Vaporesso Corex 3.0 Replacement Pod
- 0.6 Ohm Vaporesso Corex 3.0 Replacement Pod
- USB-C Charging Cable
- Reminder & Warranty Card
- User Manual
How To Set Up & Use The Xros Pro 2 Vape Kit
Charge Your Xros Pro 2
Use the included USB-C cable to charge your Xros Pro 2.
Remove Your Xros Pod
Take the pod out of the kit.
Prepare Your Pod
Remove the film from the base of the pod.
Fill Your Pod
Snap off the mouthpiece to access the red fill port and fill with e-liquid.
Insert Your Pod
Replace the mouthpiece and then slide the pod back into the device.
Prime Your Pod
Insert your pod and wait for ten minutes before vaping. This allows the e-liquid to fully soak into the cotton, improving flavour and coil longevity.
Vape Your Xros Pro 2
Inhale on the mouthpiece or press and hold the button to vape. Use the button to enter the menu to swap between Eco, Normal and Power Modes (or adjust the wattage if you’re using the 0.4 Ohm Xros pod).
Adjust The Airflow
Use the slider on the back to adjust the airflow and experience a tighter or looser inhale.
The Xros Pro 2 features a longer-lasting 2000mAh built-in battery that’s rechargeable in just 30 minutes, using the included USB-C cable.
Vaporesso Xros Corex 3.0 replacement pods are top-filling and contain built-in mesh coils that’ll help boost flavour.
The included pods support DTL and RDTL vaping. Pair the 0.4 Ohm pod with a 70% VG e-liquid, and use a 50% VG e-liquid with the 0.6 Ohm option.
Choose from a variety of sleek finishes, including: Glittering Black, Glittering Gold, Glittering Silver, Dawn Purple, Moonlit Pink, Gem Green or Storm Blue.
-
Vaporesso Xros 4 Mini Vape Kit
The Vaporesso Xros 4 Mini pod kit is perfect if you’re looking for a compact yet versatile device. Its sturdy aluminium design houses a 1000mAh built-in battery that’s big enough to last most vapers all day and with USB-C fast charging, it can be fully recharged in as little as 30 minutes. Thanks to its adjustable airflow and compatibility with the Xros pod range, you can swap between MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping with ease.
Features:
- Inhale Activated
- Built-In 1000mAh Battery
- 16W Max Power Output
- For MTL & RDTL Vaping
- Smart Mode
- Adjustable Airflow
- Compatible With All Xros Pods
To get started with the Xros 4 Mini, just insert your pod and Smart Mode will automatically recognise your coil and select the best power output. Fill your pod, then simply inhale on the mouthpiece to vape. Use the airflow slider to control how tight or loose each puff feels. A handy indicator light on the face of the device will help you keep track of your battery life so you know when it’s time to recharge.
To refill your Xros pod, remove the mouthpiece and top it up with 2ml of e-liquid. Xros pods include a built-in Corex mesh coil that’ll heat vape juice quickly and evenly to improve flavour. Within the Xros pod range, there are plenty of resistances between 0.4 Ohm and 1.2 Ohms to pick from, so it’s easy to find your perfect inhale. All Xros pods can be paired with 50% VG blends, while the lower resistance 0.4 Ohm pods can also be used with 70% VG e-liquid.
What Pods Can I Use With The Vaporesso Xros 4 Mini?
The Vaporesso Xros 4 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 4 Mini Device
- 0.6 Ohm Xros Corex Pod (Pre-Installed)
- USB-C Charging Cable
- Reminder Card
- User Manual
How To Set Up & Use The XROS 4 Mini Kit
Charge Your Device
Plug in the included USB-C charging cable into the port at the base of the kit to charge the device.
Prepare Pod For Filling
Remove the pod from the kit and remove the mouthpiece from the pod.
Fill Pod
Fill your pod, the fill port is marked with a red seal.
Replace Pod And Mouthpiece
Put the mouthpiece back on the pod and insert the pod back into the kit. Leave it to stand upright for a few minutes to let the liquid soak in.
Inhale To Vape
Smart Mode will automatically detect what pod you’re using, so just inhale on the mouthpiece to vape.
Adjust Airflow
You can switch between MTL and RDTL vaping by adjusting the airflow on the side of the device.
The Vaporesso Xros 4 Mini vape kit features an adjustable airflow, so you can effortlessly switch between a tight or loose inhale with a slider at the back.
Thanks to a handy LED indicator, you can easily keep track of how much battery life your Vaporesso Xros 4 Mini vape kit has left.
While compact, the Vaporesso Xros 4 Mini vape kit still manages to fit a built-in 1000mAh battery, which will last most vapers up to a day on a single full charge.
-
Vaporesso Xros 4 Vape Kit
The Vaporesso Xros 4 pod kit is perfect if you’re after a simple device that allows you to adjust vapour production with ease. Featuring a built-in 1000mAh battery and fast charging, this kit will fully recharge in as little as 30 minutes. Plus, thanks to the two pods included, you can alternate between MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping as and when you like.
Features:
- Button & Inhale Activated
- Built-In 1000mAh Battery
- 16W Max Power Output
- For MTL & RDTL Vaping
- Three Power Levels
- Adjustable Airflow
- Compatible With All Xros Pods
- Lockable Power Button
The Xros 4 features a single-button design. To get started, click four times to unlock the device and then just inhale on the mouthpiece or hold the button down to start vaping. Click three times to select from low, medium or high power output levels and adjust the feel of each puff. Its handy LED screen will confirm your choice and also display the battery level. You’ll experience a discreet amount of vapour with the 0.8 Ohm MTL pod or an airier, RDTL vape with the 0.4 Ohm Corex pod. For extra peace of mind, the power button can be locked.
The Xros pods are top-filling and have a 2ml e-liquid capacity, just take the mouthpiece off to access the fill port. Each one comes with a built-in Corex mesh coil that’ll heat your vape juice quickly and evenly, improving the flavour of each puff. The device boasts an airflow control slide bar to adjust how tight or loose each draw feels. We recommend filling your Xros pods with 50% VG liquid. The 0.4 Ohm option can also be paired with 70% VG vape juice.
What Pods Can I Use WIth The Vaporesso Xros 4?
The Vaporesso Xros 4 is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 4 Device
- Either a 0.4 Ohm OR 0.6 Ohm Xros Corex Pod (Pre-Installed)
- 0.8 Ohm Xros Pod
- USB-C Charging Cable
- Reminder Card
- User Manual
How To Set Up & Use The Vaporesso Xros 4 Kit
Remove The Xros 4 Mouthpiece
Remove the black mouthpiece by clicking it away from you – the easiest way to do this is to hold the device in your hand and use your thumb to push the mouthpiece off.
Fill The Vaporesso Xros 4 Pod
Fill your pod by putting the nib of your e-liquid bottle into the red rubber lined port, ensuring you fill up the 2ml pod to the brim.
Reassemble Your Xros 4 Device
Once your pod has been refilled, replace the mouthpiece. You’ll hear a click when the mouthpiece has been securely attached.
Prime Your Xros 4 Coil
Leave your pod upright for ten minutes to “prime” your coil. This gives the coil time to soak up e-liquid, which helps it last longer and boosts flavour.
Vape Your Xros 4
Simply puff on the mouthpiece to vape. You can expect a smaller amount of vapour similar to a cigarette inhale.
Recharge Your Xros 4
Recharge your Xros 4 device using a USB-C cable.
The XROS 4 vape kit by Vaporesso uses 2ml refillable pods with built-in mesh coils. The Corex 2.0 construction of these pods will improve the flavour of each puff, heating e-liquid quickly and evenly.
A sliding airflow control bar on the back of the XROS 4 by Vaporesso allows you to adjust how tight or loose each draw feels, for MTL & RDTL vaping with ease.
The handy display screen and single button control of the XROS 4 vape kit lets you lock and unlock the device whilst offering three power outputs.
The Vaporesso XROS 4 vape kit features a powerful 1000mAh built-in battery that can be fully recharged in as little as 30 minutes, thanks to its fast charging capability.
Thanks to its aluminium alloy construction, the XROS 4 vape kit by Vaporesso is a sleek and sturdy device.
The Vaporesso XROS 4 vape kit is compatible with a wide range of XROS replacement pods including 0.4 Ohm, 0.6 Ohm, 0.8 Ohm, 1.0 Ohm and 1.2 Ohm versions, so there are plenty of options for MTL & RDTL vapers.
-
Vaporesso Xros 5 Nano Vape Kit
The Xros 5 Nano kit is ideal for both new and experienced vapers looking for something pocket-friendly and versatile. The built-in rechargeable battery should last for an entire day before it needs to be recharged. With an output range of up to 30W and compatibility with Xros Corex pods, this device can be used for both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. Two pods in different resistances are included with the kit to get you started.
Features:
- 1600mAh Built-In Battery (Charges in 50 Minutes)
- Up To 30W Power Output
- MTL & RDTL Vaping
- Inhale & Button Activation
- Three Power Levels
- Touch Screen
- Adjustable Airflow
- 2ml E-Liquid Capacity
- Compatible With Xros Corex Pods
- Top-Filling Pods
- Compatible With 50% VG E-Liquid
Setting up the Xros 5 Nano is simple. Fill a pod up with e-liquid and insert it into the device, and then inhale to vape. There are three power modes and you can use the touchscreen to swap between them. In Eco Mode, your kit produces a smaller amount of vapour and your battery will last for longer between charges. Normal Mode delivers a balanced vape, and Power Mode sends more power to the coil to boost flavour. The airflow slider allows you to adjust how loose or restricted each inhale is.
Xros pods feature a top-filling design and house mesh coils, which boost flavour by heating e-liquid quickly. This kit is compatible with all Xros pods, which are available in resistances from 0.4 Ohm to 1.2 Ohm. Lower resistance pods are made for RDTL vaping. Higher resistance pods are designed for MTL vaping and will create small amounts of vapour. We recommend pairing Xros pods with a resistance of 0.6 Ohm or higher with 50% VG e-liquid. The 0.4 Ohm pods, available separately, work best with high VG e-liquid.
What Pods Can I Use WIth The Vaporesso Xros 5 Nano?
The Vaporesso Xros 5 Nano is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.4 Ohm (30W) 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Xros 5 Nano Device
- 0.6 Ohm Xros Corex Pod
- 0.8 Ohm Xros Corex Pod
- USB-C Charging Cable
- User Manual
How To Set Up & Use The Vaporesso Xros 5 Nano Kit
Recharge via USB-C
Charge your Xros 5 Nano kit with the included USB-C cable via the charging port on the side of the device.
Remove pod and mouth piece to reveal fill port
Remove the pod from the device and pull off the black mouthpiece to reveal the fill port.
Fill via the red port on the top of the pod
Fill your pod with e-liquid via the red port.
Replace fill port cover and insert into battery
Click the mouthpiece back in place and insert the pod into the top of the device.
Wait 10 mins for the coil to prime
Wait 10 minutes before you vape to give the coil time to absorb e-liquid.
Inhale to activate
Inhale on the mouthpiece to start vaping.
Powered by a 1600mAh battery, the Xros 5 Nano will last most vapers all day, before recharging in less than an hour with the included USB-C cable.
The Xros 5 Nano is compatible with the full range of Xros pods with resistances ranging from 0.4 Ohm – 1.2 Ohm. Each kit includes a 0.6 Ohm and a 0.8 Ohm pod.
Designed with both MTL and RDTL vaping in mind, the Xros 5 Nano pairs best a 50% VG e-liquid.
The Xros 5 Nano offers 3 different power modes to choose from: Normal, Eco, and Power Mode.
The Xros 5 Nano features an easy-to-read touchscreen display that makes customising your kit easy.
-
Vaporesso XROS 4 MINI Vape Kit
Kit Contents
- 1 x Vaporesso XROS 4 MINI Kit
- 2 x Vaporesso XROS Series Pods
- 1 x USB-C cable
- 1 x User manual
-
Vaporesso XROS 3 Mini Pod Kit
VAPORESSO XROS 3 MINI POD VAPE KIT
The Vaporesso XROS 3 Mini pod kit is a small, compact and discreet pod starter kit featuring a large 1000 mAh internal battery with an intelligent battery life indicator and offers various styles of vaping, from tight MTL to a looser RDTL inhale.
The XROS 3 Mini Pod kit includes a 0.6Ω XROS Original series pod cartridge, but is fully compatible with the XROS COREX 2.0 and XROS COREX 3.0 replacement pods for further utility. Choose your perfect vaping style through a wide range of premium-quality dual mesh refillable pods.
XROS Family
The XROS 3 Mini system allows vapers to use a straightforward MTL pod system, with the added flexibility of restricted direct-to-lung vaping through a more free and open inhale, achieved using the 0.6Ω pod option.
With a 1000 mAh high-density battery and COREX heating tech, the XROS 3 Mini pod system is the best within the XROS family of pod devices.
Flawless, rounded-edge design
The XROS 3 Mini pod kit features a mouthpiece shaped to be more flat and perfectly suited to fit the user, providing a more accurately tight MTL experience.
The sleek, slim design of the XROS 3 presents a premium and modern look, with comfortability delivered in the palm of your hand.
XROS 3 and XROS 3 Mini Pods
The XROS series of replacement pods already feature 0.8Ω and 1.2Ω MTL pod choices, with top-filling and Mesh coil features.
New to the series is a 1.0Ω addition to the tighter MTL experience and a 0.6Ω RDTL option, offering a more free inhale while still benefiting from the flavour production that the XROS is renowned for. XROS pods offer the assurance of a leak-proof experience with SSS Leak-Resistant technology.
Nic Salt and Free Base
All four XROS pod options are designed for use with both Freebase and Nic Salt e-liquids, with the 0.6Ω pod being designed to provide a sweeter experience with free base e-liquids.
High-density battery
The XROS 3 Mini might be mini by nature, but with a huge internal 1000 mAh high-density battery, the XROS mini delivers a consistent all-day vaping experience.
Oh. So. Powerful.
Don’t be fooled by the XROS’ size, as the innovative COREX heating technology applied with a unique morph-mesh coil structure ensures a more rapid and even heating system to vaporise your e-liquid to provide full flavour potential efficiently.
XROS pod technology provides higher liquid delivery through the use of fluffier cotton material, preventing a burnt taste from a shortage of e-liquid and extending the pod’s longevity by up to 50%.
-
Vaporesso Xros 3 Vape Kit
The Vaporesso Xros 3 vape kit is a straightforward option that is ideal for new vapers, and its built-in 1000mAh battery can support long vaping sessions. The kit comes complete with a 2ml refillable Xros pod that has a RDTL (Restricted Direct To Lung) coil built in, which eliminates the need for messy coil changes. It also includes a spare MTL (Mouth To Lung) pod in the box, so you can switch up your inhale style.
Features:
- RDTL & MTL Vaping
- Built-In 1000mAh Battery
- 16W Max Power Output
- Single Button Activation
- Pulse Mode
- 2ml Refillable Pods
- Integrated Coils
Thanks to single button activation, there are no menus or screens to contend with, unlock the kit with five clicks and start vaping by either pressing the button or just inhaling on the mouthpiece. Just puff on the mouthpiece of your Xros 3 and it will create a small amount of vapour for an MTL vape with the 1.0 Ohm pod installed. The 0.6 Ohm pod creates a moderate amount of vapour with a tighter draw, allowing for an RDTL vape. Thanks to its AXON chip, it also features Pulse Mode, which intensifies the power and flavour of your vape.
The Xros pod has a top-filling design and you can easily refill it via the port located underneath the mouthpiece; you don’t even have to remove it from your device. It also features leak-resistant technology to cut down on mess. Thanks to its adjustable airflow, you can switch between a tighter or looser draw for a vape that suits you. Plus, the mesh design of the built-in coils heats up your e-liquid faster for better flavour. We recommend pairing either of the included pods with 50% VG e-liquid or higher PG options. For a lower maintenance option, pair the Xros 3 with prefilled Deliciu Mate pods.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
Contains:
- Vaporesso Xros 3 Device
- 0.6 Ohm Vaporesso Xros Pod (Pre-Installed)
- 1.0 Ohm Vaporesso Xros Pod
- USB-C Charging Cable
- User Manual
How To Set Up & Use Your Vaporesso XROS 3 Kit
Charge Your XROS 3
Equipped with a long-lasting 1000mAh battery, make sure your kit is fully charged before using it. You can use the included cable and a full charge takes about an hour.
Remove The XROS 3 Mouthpiece
Take the XROS pod out of your kit and then remove the black mouthpiece. You won’t need any tools, just push against the mouthpiece until it clicks off.
Fill The Vaporesso XROS 3 Pod
With the mouthpiece removed, you’ll be able to see the filling port on the pod. Put the nib of your e-liquid bottle into the hole with the red underlay to refill.
Reassemble Your XROS Pod
When it’s refilled, reattach the black mouthpiece to your pod. You can put it in the kit if this feels a little fiddly. Push the mouthpiece back on until you hear a click.
Prime Your XROS Coil
Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid and can help it last longer.
Unlock And Vape Your Vaporesso XROS 3 Kit
With the pod inserted into your kit you’re ready to go, click the kit’s firing button five times to unlock it. Press it again to vape and lock the kit when you’re done.
The Vaporesso Xros 3 vape kit is compatible with the entire Xros range of pods, so it supports both MTL and RDTL vaping.
Thanks to its intelligent AXON chip, the Vaporesso Xros 3 vape kit features Pulse Mode, which intensifies the power and flavour of your vape. *Please note that the estimated 48 hour battery life is based on average use.*
The Vaporesso Xros 3 vape kit features an adjustable airflow, so you can switch seamlessly between a tighter or looser draw.
The Vaporesso Xros pods are easily filled from the top and feature leak-resistant technology to cut down on mess.
-
Vaporesso Xros 3 Mini Vape Kit
The Vaporesso Xros 3 Mini vape kit is designed with simplicity in mind and is an ideal option for first time switchers. Its built-in 1000mAh battery is capable of supporting lengthy sessions of vaping. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which eliminates the need for messy coil changes thanks to featuring an integrated RDTL (Restricted Direct To Lung) coil.
Features:
- RDTL Vaping
- Built-In 1000mAh Battery
- Inhale Activated
- 2ml Refillable Pods
- Integrated Coils
With inhale activation technology, there are no buttons or menus to contend with. All you have to do is puff on the mouthpiece, which will create a moderate amount of vapour for an RDTL vape that has a tighter feeling draw. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour.
Xros pods feature a top-filling design and are easily refilled via the filling port located underneath the mouthpiece; you don’t even have to remove them from your device when refilling. The mesh build of the coils inside means the e-liquid heats up faster for better flavour. We recommend pairing this kit with 50% VG e-liquid or higher PG options.
Please note: This kit is compatible with all Xros replacement pods other than the 0.4 Ohm versions, which can only be used with the Xros Pro kit.
What Pods Can I Use With The Vaporesso Xros 3 Mini?
The Vaporesso Xros 3 Mini is compatible with the following pods:
- Vaporesso Xros Corex pods: 0.6 Ohm (21W), 0.8 Ohm (16W), 1 Ohm (12W), 1.2 Ohm (10W)
Contains:
- Vaporesso Xros 3 Mini Device
- 0.6 Ohm Vaporesso Xros Pod
- USB-C Charging Cable
- User Manual
How To Set Up And Use The Vaporesso Xros 3 Mini Kit
Remove The Xros 3 Mini Mouthpiece
Take the Xros pod out of your kit and remove the black mouthpiece by clicking it away from you – the easiest way to do this is to hold the device in your hand and use your thumb to push the mouthpiece off.
Fill The Vaporesso Xros 3 Mini Pod
Fill your pod by putting the nib of your e-liquid bottle into the hole ringed with red rubber.
Reassemble Your Xros 3 Mini Pod
Once your pod has been refilled, replace the mouthpiece. You’ll hear a click when the mouthpiece has been securely attached.
Prime Your Xros 3 Coil
Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid, which helps it last longer and boosts flavour.
Vape Your Xros 3 Mini
Inhale on the mouthpiece to vape. You’ll experience a small amount of vapour for an MTL inhale.
Charge Your Xros 3 Mini
We recommend charging your kit before you use it. Using the included USB-C cable, a full charge should take around an hour.
Thanks to its 1000mAh battery, the Vaporesso Xros 3 Mini can support long sessions of vaping in between charges.
The Vaporesso Xros pods are easily filled from the top and feature leak-resistant technology to cut down on mess.
The Vaporesso Xros 3 Mini vape kit boasts an eye-catching, innovative gradient design that’s aesthetically pleasing, so you can vape in style.
The Vaporesso Xros 3 Mini vape kit is compatible with the entire Xros range of pods, so it can support both MTL and RDTL vaping.
-
Vaporesso Xros 3 Nano Vape Kit
The Vaporesso Xros 3 Nano vape kit is designed to be as easy to use as possible and is a good choice for new and seasoned vapers alike. Its built-in 1000mAh battery will last most vapers up to a day before needing to be recharged and supports the device’s power output range of 11–16W. The kit includes a 2ml refillable pod from the Vaporesso Xros range, which removes the need for messy coil changes thanks to its built-in coil.
Features:
- RDTL Vaping
- Built-In 1000mAh Battery
- Inhale Activated
- Adjustable Airflow
- 2ml Refillable Pods
- Built-In Coils
Thanks to Smart Mode, your device will detect the resistance of your pod’s built-in coil and automatically select the best wattage to match it — making setup quick and easy. Since this kit is inhale activated, you don’t have to deal with any buttons or menus. Just inhale on the mouthpiece and the device will create a moderate amount of vapour for an RDTL (Restricted Direct To Lung) inhale. You can also find MTL (Mouth To Lung) Xros pods sold separately, if you prefer a more discreet amount of vapour. Thanks to an airflow adjustment switch, you can switch between a tighter or looser draw with ease. Beyond that, it also features Pulse Mode, which delivers a powerful vape and keeps it consistent.
The included Xros pods feature a top-filling design and can be easily refilled via the filling port located underneath the mouthpiece; which means you don’t have to remove them from your kit when topping up. The mesh build of the coils inside means that your e-liquid is heated up at a faster rate, improving the flavour. We recommend pairing this kit with 50/50 e-liquid or higher PG options. The Xros 3 Nano is also compatible with the prefilled Deliciu Mate pods.
Please note: This kit is compatible with all Xros replacement pods other than the Xros Pro versions, which can only be used with the Xros Pro kit.
Contains:
- Vaporesso Xros 3 Nano Vape Device
- 0.6 Ohm Vaporesso Xros Pod (Pre-installed)
- 0.8 Ohm Vaporesso Xros Pod (Spare)
- USB-C Charging Cable
- User Manual
- Lanyard
Thanks to compatibility with the whole Xros pod range, the Vaporesso Xros 3 Nano vape kit will work with both nic salt and freebase e-liquid.
The Vaporesso Xros 3 Nano vape kit features Pulse Mode, which elivers a powerful vape and keeps it consistent — even at low battery.
The Vaporesso Xros pods feature a simple top-filling design, so you don’t even have to remove them from your device to top them up.
The Vaporesso Xros 3 Nano vape kit features an airflow adjustment switch, so you can switch between a tighter or looser draw with ease to tailor the feel of your inhale.
-
Vaporesso Xros 3 Mini Kit
The Vaporesso XROS 3 MINI Kit is the new best pod in XROS family, an extremely simple MTL pod system which can do RDL experience. Cross the limits of MTL&RDL experience with the new 0.6Ωpod and 1000mAh high density battery. Cross the limits of strong flavor with the COREX heating tech. Cross the limits of design and reliability by upgraded mouthpiece and SSS Leak resistant tech.
The new 0.6Ω Pod is newly added to the XROS Pods platform and designed to provide a sweeter experience with free base. And it’s also compatible with the other XROS pods to provide the perfect MTL experience.
Features:
Box Contents:
